How far can a projecting sign stick out?

There's no single UK figure. It depends on pavement width, clear height, the council's shopfront guidance and the highway authority's view. Lit projecting signs are usually modest, stopping well short of the kerb, and the survey records the pavement width for the drawings.

Do you cover smaller places near Edinburgh as well?

Yes. Our coverage is not limited to Edinburgh itself: nearby towns, industrial estates and business parks across Edinburgh and the Lothians are included too. The process does not change with the postcode. Send photos and approximate sizes, and we will tell you whether a site visit is needed before we can give you a fixed price.

Is there a guide price for illuminated projecting signs in Edinburgh?

Yes: £695–£2,250 per sign + VAT is our guide range. It is not a fixed quote, because no two jobs are the same size or on the same surface. The area covered, materials, the number of letters or panels, removal of anything old and access all change the figure, which we confirm after seeing the site or artwork.

When could work on illuminated projecting signs go ahead in Edinburgh?

Fitting is typically scheduled once three things are in place: you have approved the proof, the materials are made or delivered, and any consent the job needs has been granted. For many jobs that is typically a few weeks from approval; illuminated or larger fabricated signs typically take longer, and consent decisions run to their own timetable.

Will the sign swing in the wind?

It shouldn't. A lit box is fixed rigidly to its bracket rather than hung on chains, so it stays still in normal winds, with the bracket and fixings sized for its weight and exposure. Traditional hanging signs move; lit ones are fixed solid.

Can you reuse our existing bracket?

Sometimes. If the bracket is sound, well placed and strong enough, reusing it saves cost and avoids fresh holes. Rust at the wall plate, cracked masonry, missing fixings or no route for a cable usually mean a new bracket is safer.

Illuminated projecting signs in Edinburgh and the Lothians

An illuminated projecting sign is a double-sided sign fixed at right angles to the building on a bracket, with LEDs inside or behind it, so people approaching along the pavement can read it.

Why choose illuminated projecting signs in Edinburgh and the Lothians?

A lit roundel tells people an Edinburgh pub or restaurant is open on winter evenings, when fascias fall into shadow.
Chains across Edinburgh and the Lothians can use one lit roundel design, so an Edinburgh site is recognised from the street's end.
Where an Edinburgh street is busy with vans and buses, setting the sign high and back from the kerb matters.

Guide prices in Edinburgh and the Lothians

Pricing for illuminated projecting signs is worked out job by job, but the guide range is £695 to £2,250 per sign + VAT. The table lists typical options. Your figure is confirmed only after a site survey or a check of the artwork you send.

Illuminated projecting signs in Edinburgh and the Lothians: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Round or square lit projecting sign	£695 – £1,450	£834 – £1,740
Shaped or halo-lit projecting sign	£1,250 – £2,250	£1,500 – £2,700

Guide prices: £695–£1,450 + VAT for a round or square lit projecting sign, and £1,250–£2,250 + VAT for a shaped or halo-lit design, each up to about 800 mm with a bracket. Prices exclude VAT and are confirmed after survey and artwork check.

Consent for illuminated signs in Edinburgh and the Lothians

Exterior illuminated signs in Scotland usually need express advertisement consent from the council under the Town and Country Planning (Control of Advertisements) (Scotland) Regulations 1984, as amended. Applications are normally made through eDevelopment.scot, and the council can confirm its timescales and any conditions on hours or brightness. Brightness is commonly judged against the ILP's PLG05 guidance, and static lighting is expected. If the building is listed, listed building consent is usually needed as well. An electrician makes the final mains connection to BS 7671 and you receive the certificate. We prepare drawings and photos for the application, or submit it for you.

Options worth considering

Routed push-through

Painted metal faces where only lettering and logo glow.

Round lit sign

A roundel lit through opal faces, readable from both directions.

Shaped sign

Cut to a logo, symbol or product outline.

Towns in Edinburgh and the Lothians

Looking for a specific town? Every place listed here falls within our coverage of Edinburgh and the Lothians for illuminated projecting signs; open one to see the details for that town.

Whether your business is in a busy centre or a quieter corner of Edinburgh and the Lothians, getting a quote for illuminated projecting signs is free. Share photos and sizes, then approve the proof before anything is made.