What makes illuminated projecting signs more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Darlington is £695–£2,250 per sign + VAT, confirmed after a survey or artwork check.

Does the sign need its own supply?

It needs a supply, though not necessarily a new circuit. An electrician usually takes a switched, fused feed from inside the building close to the bracket, often sharing a time switch with your fascia lighting, and certifies the connection to BS 7671.

Do you work across County Durham or only in Darlington?

Across all of County Durham, and the rest of the UK too. Darlington is simply one of the places we list, and enquiries from anywhere nearby follow exactly the same steps: photos or a survey, a scaled proof, a written price, then making and fitting once you sign off the design.

Are lit signs allowed on listed buildings?

Sometimes, but expect extra scrutiny. You'll usually need listed building consent as well as advertisement consent, and councils may favour halo-lit or externally lit designs and traditional brackets on historic frontages. Cable routes and fixings are planned to avoid damaging historic fabric.

What is the typical timescale for illuminated projecting signs from enquiry to fitting?

A quote typically follows once we have your photos or have surveyed the site, and making and fitting is typically booked a few weeks after you approve the proof. Where advertisement consent applies, that decision has to come through before anything goes up, which can add several weeks. We give you an expected timescale with your quote for Darlington.

How far can a projecting sign stick out?

There's no single UK figure. It depends on pavement width, clear height, the council's shopfront guidance and the highway authority's view. Lit projecting signs are usually modest, stopping well short of the kerb, and the survey records the pavement width for the drawings.

Illuminated projecting signs in County Durham

An illuminated projecting sign is a double-sided sign fixed at right angles to the building on a bracket, with LEDs inside or behind it, so people approaching along the pavement can read it.

Why choose illuminated projecting signs in County Durham?

Upper-floor clinics, dentists and studios in Darlington can mark an easily missed street door with a lit projecting sign.
Where a Darlington street is busy with vans and buses, setting the sign high and back from the kerb matters.
A lit roundel tells people a Darlington pub or restaurant is open on winter evenings, when fascias fall into shadow.

Guide prices in County Durham

Budgeting for illuminated projecting signs? The guide below runs from £695 to £2,250 per sign. VAT is extra. Size, materials and access decide where your job lands, and we confirm it in writing after surveying or checking the artwork.

Illuminated projecting signs in County Durham: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Round or square lit projecting sign	£695 – £1,450	£834 – £1,740
Shaped or halo-lit projecting sign	£1,250 – £2,250	£1,500 – £2,700

Guide prices: £695–£1,450 + VAT for a round or square lit projecting sign, and £1,250–£2,250 + VAT for a shaped or halo-lit design, each up to about 800 mm with a bracket. Prices exclude VAT and are confirmed after survey and artwork check.

Consent for illuminated signs in County Durham

Illuminated signs are treated more strictly than unlit ones in England. Deemed consent for illumination is limited, and it does not apply at all in conservation areas, National Parks, National Landscapes, the Broads or areas of special control, so most internally lit or halo-lit fascia and projecting signs need express consent from the council. Decisions usually take up to 8 weeks and consent is normally granted for 5 years. Councils commonly assess brightness against the Institution of Lighting Professionals' guidance PLG05, and lighting should be static. An electrician makes the final mains connection to BS 7671. We can prepare the drawings and photos for your application, or submit it for you.

Options worth considering

Round lit sign

A roundel lit through opal faces, readable from both directions.

Halo-lit projecting

Solid letters lit from behind against a backing plate.

Square or rectangular

More face area for a name and strapline.

Towns in County Durham

Pick your town below to see the page for illuminated projecting signs there. The list shows the main towns in County Durham; smaller places around them are covered too.

Whether your business is in a busy centre or a quieter corner of County Durham, getting a quote for illuminated projecting signs is free. Share photos and sizes, then approve the proof before anything is made.