What can delay illuminated projecting signs in Wrexham?

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.

Do you work across Clwyd or only in Wrexham?

Across all of Clwyd, and the rest of the UK too. Wrexham is simply one of the places we list, and enquiries from anywhere nearby follow exactly the same steps: photos or a survey, a scaled proof, a written price, then making and fitting once you sign off the design.

Why is there a price range for illuminated projecting signs rather than one figure?

Because jobs vary. The guide of £695 to £2,250 per sign + VAT spans small, simple work at one end and larger, more involved work at the other. Size, material, finish, access, design time and any consent drawings push the figure up or down. A survey or artwork check lets us fix the price for your job in Wrexham.

Are lit signs allowed on listed buildings?

Sometimes, but expect extra scrutiny. You'll usually need listed building consent as well as advertisement consent, and councils may favour halo-lit or externally lit designs and traditional brackets on historic frontages. Cable routes and fixings are planned to avoid damaging historic fabric.

Does the sign need its own supply?

It needs a supply, though not necessarily a new circuit. An electrician usually takes a switched, fused feed from inside the building close to the bracket, often sharing a time switch with your fascia lighting, and certifies the connection to BS 7671.

How far can a projecting sign stick out?

There's no single UK figure. It depends on pavement width, clear height, the council's shopfront guidance and the highway authority's view. Lit projecting signs are usually modest, stopping well short of the kerb, and the survey records the pavement width for the drawings.

Illuminated projecting signs in Clwyd

An illuminated projecting sign is a double-sided sign fixed at right angles to the building on a bracket, with LEDs inside or behind it, so people approaching along the pavement can read it.

Why choose illuminated projecting signs in Clwyd?

A lit roundel tells people a Wrexham pub or restaurant is open on winter evenings, when fascias fall into shadow.
On a narrow Wrexham street, people walking along the pavement often see a projecting sign before they can read any fascia.
Before you commit to a lit design in a historic part of Wrexham, we check the council's approach to projecting signs.

Guide prices in Clwyd

Below is the guide pricing we use for illuminated projecting signs: from £695 up to £2,250 per sign, before VAT. These are not fixed quotes. A written price follows once measurements are taken and your artwork has been checked.

Illuminated projecting signs in Clwyd: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Round or square lit projecting sign	£695 – £1,450	£834 – £1,740
Shaped or halo-lit projecting sign	£1,250 – £2,250	£1,500 – £2,700

Guide prices: £695–£1,450 + VAT for a round or square lit projecting sign, and £1,250–£2,250 + VAT for a shaped or halo-lit design, each up to about 800 mm with a bracket. Prices exclude VAT and are confirmed after survey and artwork check.

Consent for illuminated signs in Clwyd

Illuminated fascia and projecting signs in Wales usually need express consent from the council under the Town and Country Planning (Control of Advertisements) Regulations 1992, as amended. Because the Welsh rules differ in detail from England's, we check with the planning authority what applies to your building, especially in a conservation area or on a listed building, where listed building consent may also be needed. Councils commonly look at brightness against the ILP's PLG05 guidance and expect static lighting. The final connection to the mains is made by an electrician to BS 7671, and you receive the certificate. We prepare the drawings and photos, or submit the application for you.

Options worth considering

Square or rectangular

More face area for a name and strapline.

Routed push-through

Painted metal faces where only lettering and logo glow.

Shaped sign

Cut to a logo, symbol or product outline.

Towns in Clwyd

We take on illuminated projecting signs in all of these towns across Clwyd, and in the smaller places, estates and business parks between them. Select a town to open its own page.

Ready when you are. Request a free quote for illuminated projecting signs in Clwyd and attach whatever you have: snapshots, dimensions, a logo file. We send a scaled drawing, and nothing goes ahead without your sign-off.