Could the consent process affect the timing of my job in Luton?

It can. Not every job needs an application, but where express consent is required the council's decision typically takes several weeks, and fitting typically waits until it is granted. We check this at the start, so the timetable you receive with your quote allows for consent where it applies, along with the proof approval stage.

What do you need from me to quote for illuminated projecting signs in Luton?

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

Can each side show something different?

Yes. The two faces are separate, so one side can carry your logo and the other a name or service, though many businesses keep both identical so the sign reads the same from either direction. Any difference should be shown on the consent drawings.

Is there a guide price for illuminated projecting signs in Luton?

Yes: £695–£2,250 per sign + VAT is our guide range. It is not a fixed quote, because no two jobs are the same size or on the same surface. The area covered, materials, the number of letters or panels, removal of anything old and access all change the figure, which we confirm after seeing the site or artwork.

Will the sign swing in the wind?

It shouldn't. A lit box is fixed rigidly to its bracket rather than hung on chains, so it stays still in normal winds, with the bracket and fixings sized for its weight and exposure. Traditional hanging signs move; lit ones are fixed solid.

Are lit signs allowed on listed buildings?

Sometimes, but expect extra scrutiny. You'll usually need listed building consent as well as advertisement consent, and councils may favour halo-lit or externally lit designs and traditional brackets on historic frontages. Cable routes and fixings are planned to avoid damaging historic fabric.

Illuminated projecting signs in Bedfordshire

An illuminated projecting sign is a double-sided sign fixed at right angles to the building on a bracket, with LEDs inside or behind it, so people approaching along the pavement can read it.

Why choose illuminated projecting signs in Bedfordshire?

Corner premises in Luton can put a projecting sign on the side wall to catch people coming from the cross street.
Where a Luton street is busy with vans and buses, setting the sign high and back from the kerb matters.
A lit roundel tells people a Luton pub or restaurant is open on winter evenings, when fascias fall into shadow.

Guide prices in Bedfordshire

Below is the guide pricing we use for illuminated projecting signs: from £695 up to £2,250 per sign, before VAT. These are not fixed quotes. A written price follows once measurements are taken and your artwork has been checked.

Illuminated projecting signs in Bedfordshire: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Round or square lit projecting sign	£695 – £1,450	£834 – £1,740
Shaped or halo-lit projecting sign	£1,250 – £2,250	£1,500 – £2,700

Shape, lighting style and bracket design make the biggest difference. Wall construction, cable route, access equipment, pavement or highway licences and council fees are listed separately.

Consent for illuminated signs in Bedfordshire

Plan for express consent. In England most internally illuminated and halo-lit signs on a fascia or projecting bracket need it, and deemed consent does not cover illuminated signs in conservation areas, National Parks, National Landscapes, the Broads or areas of special control. The council usually decides within 8 weeks, and consent normally lasts 5 years. Expect questions about brightness: many councils refer to ILP guidance PLG05, which sets maximum luminance by zone, and they expect steady light rather than flashing. We prepare scaled drawings and photo mock-ups for the application, or submit it for you, and an electrician completes the connection to BS 7671 and gives you the certificate.

Options worth considering

Halo-lit projecting

Solid letters lit from behind against a backing plate.

Round lit sign

A roundel lit through opal faces, readable from both directions.

Routed push-through

Painted metal faces where only lettering and logo glow.

Towns in Bedfordshire

The towns below are all part of our coverage of Bedfordshire. Each link opens the illuminated projecting signs page for that town, with guide prices, consent notes and how to get a quote.

Start your illuminated projecting signs enquiry for Bedfordshire now: images and rough measurements help us price accurately. Quotes cost nothing, and you see and approve the design before production starts.