Illuminated built-up letters are fabricated 3D letters with translucent opal acrylic faces and LED modules inside, so each face glows and your name reads clearly after dark.
Points in favour of illuminated built-up letters in Renfrew
- Winter darkness arrives by late afternoon, so face-lit letters keep a Renfrew shopfront readable to people heading home.
- For a Renfrew takeaway, gym or bar open into the evening, a lit name turns glances into visits.
- With a photocell fitted, a Renfrew sign switches itself on as daylight fades, even after staff have gone home.
What illuminated built-up letters cost in Renfrew
The table shows guide prices for illuminated built-up letters, starting from £140 and reaching about £360 per letter. All figures exclude VAT. Your own price is confirmed after we have seen the site or the artwork, so treat these as a starting point.
| Item | Guide, ex VAT | Inc. VAT (20%) |
|---|---|---|
| Face-lit letter, 300–600 mm | £140 – £360 | £168 – £432 |
| Typical business name (10–14 letters) | £2,400 – £8,900 | £2,880 – £10,680 |
| Final electrical connection by an electrician | £150 – £350 | £180 – £420 |
Height and letter count drive most of the cost; stainless returns and trimless faces add more, as do access equipment, old-sign removal and consent drawings.
Options for your Renfrew project
Fully lit acrylic
Faces and returns both glow, so letters read well from an angle.
Raceway mounted
Letters on a slim box that hides the drivers.
Trim cap
A plastic edge holds each face on; robust and easy to service.
Consent for illuminated signs in Renfrew
Illumination brings Scottish signs firmly into the consent process. Under the 1984 Scotland Regulations, internally lit or halo-lit fascia and projecting signs usually need express consent; the council decides, and listed buildings or conservation areas add an extra layer, with listed building consent usually required on a listed building. Keep the light static and the luminance within the PLG05 guidance the council is likely to reference. LED modules and drivers run at low voltage, while the final connection is made to BS 7671 by an electrician. We confirm the route before you commit and can handle the drawings or the eDevelopment.scot submission.
Covering Renfrew and Renfrewshire and Inverclyde
Yes, Renfrew is covered, as is the rest of Renfrewshire and Inverclyde. For signs that are fixed to a wall or wired in, we arrange a visit to survey first. For window film, lettering or vehicle graphics, a set of photos with measurements is often all we need to put a price together. In postcode terms, Renfrew jobs typically fall in PA4, G14, PA1 and G13. Renfrew lies around 3.2 miles north-east of Paisley.
Other towns near Renfrew
- Illuminated built-up letters in Clydebank 2 mi
- Illuminated built-up letters in Erskine 3 mi
- Illuminated built-up letters in Paisley 3 mi
- Illuminated built-up letters in Bearsden 4 mi
- Illuminated built-up letters in Barrhead 5 mi
Start with a free quote: a handful of photos plus approximate widths and heights is enough for illuminated built-up letters in Renfrew. You check and approve the proof, and only then is anything made.
More signs in Renfrew
- Glass manifestation in Renfrew
- Totem and pylon signs in Renfrew
- Fleet livery in Renfrew
- Frosted window film in Renfrew
- Chapter 8 chevron kits in Renfrew
- One-way vision film in Renfrew
- Van wraps in Renfrew
- Projecting and hanging signs in Renfrew
All sign types in Renfrew · Illuminated built-up letters across Renfrewshire and Inverclyde