Who carries out the work on halo-lit letters in Edinburgh?

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

How far off the wall do halo letters sit?

Usually 25–50 mm. Closer gives a tight, bright outline; further gives a softer, wider glow and makes the letters seem to float. Larger letters generally sit further out. The distance is set on the drawings and fine-tuned on the locators during fitting.

Can halo letters be used inside?

Yes, and reception walls suit them well. Indoor letters can be slimmer, with drivers in a ceiling void. A sign well inside the building is usually outside advertisement control, though check if it's visible through glazing. An electrician still makes the connection to BS 7671.

Can the halo be coloured?

Yes. Coloured LEDs can give an amber, blue or brand-coloured halo, and colour-changing LEDs are possible where consent allows. White remains the usual choice because it suits most metals and walls. Keep street-facing light static, as flashing light generally needs specific consent.

Could the consent process affect the timing of my job in Edinburgh?

It can. Not every job needs an application, but where express consent is required the council's decision typically takes several weeks, and fitting typically waits until it is granted. We check this at the start, so the timetable you receive with your quote allows for consent where it applies, along with the proof approval stage.

What makes halo-lit letters more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Edinburgh is £160–£420 per letter + VAT, confirmed after a survey or artwork check.

Halo-lit letters in Edinburgh

Halo-lit letters are solid-faced fabricated letters with LEDs inside that shine backwards onto the wall, so each letter stands in silhouette against a soft outline of light.

Practical reasons to consider halo-lit letters in Edinburgh

Offices on an Edinburgh business park can use halo-lit names on pale cladding to guide winter-evening visitors to reception.
At an Edinburgh hotel entrance, brushed steel or brass halo letters read as part of the building's architecture.
Next to bright lightboxes on an Edinburgh parade, a soft halo stands apart by being gentler rather than brighter.

What halo-lit letters cost in Edinburgh

Below is the guide pricing we use for halo-lit letters: from £160 up to £420 per letter, before VAT. These are not fixed quotes. A written price follows once measurements are taken and your artwork has been checked.

Halo-lit letters in Edinburgh: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Halo-lit letter, 300–600 mm	£160 – £420	£192 – £504
Typical business name (10–14 letters)	£2,800 – £9,800	£3,360 – £11,760
Final electrical connection by an electrician	£150 – £350	£180 – £420

Metal and finish matter most: brass, bronze and mirror cost more than painted or brushed. Face-and-halo letters, backing panels, stone drilling and access equipment add to the total.

Options for your Edinburgh project

Face-and-halo

An opal face plus a lit wall, for longer viewing distances.

Backing panel

A pale panel behind the letters for dark or rough walls.

Painted or powder-coated

Any RAL colour; matt black gives the boldest silhouette.

Consent for illuminated signs in Edinburgh

Illumination brings Scottish signs firmly into the consent process. Under the 1984 Scotland Regulations, internally lit or halo-lit fascia and projecting signs usually need express consent; the council decides, and listed buildings or conservation areas add an extra layer, with listed building consent usually required on a listed building. Keep the light static and the luminance within the PLG05 guidance the council is likely to reference. LED modules and drivers run at low voltage, while the final connection is made to BS 7671 by an electrician. We confirm the route before you commit and can handle the drawings or the eDevelopment.scot submission.

Covering Edinburgh and Edinburgh and the Lothians

Smart Signs works throughout Edinburgh and the Lothians, Edinburgh included, and across the rest of the country. A survey visit is arranged for fitted and illuminated signs so nothing is guessed. Window, wall and vehicle graphics can usually be priced remotely from good photos and accurate measurements. In postcode terms, Edinburgh jobs typically fall in EH1, EH2, EH3 and EH8.

Close to Edinburgh

Ready to price halo-lit letters in Edinburgh? Send a few photos and rough sizes through the form or WhatsApp. The quote is free, and you will see a proof to scale before anything is made.

More signs in Edinburgh

All sign types in Edinburgh · Halo-lit letters across Edinburgh and the Lothians

Fixing / installation	Locators into the wall; one cable hole per letter
Typical size	Letters 300–600 mm tall, stood 25–50 mm off the wall
Typical lead time	typically 4–6 weeks after proof approval, plus consent