Glass manifestation in Banbridge

Usually not. Frosted film and most vinyls show from both sides because the glass is clear, so one layer on the room side normally works. Printed or coloured designs may need a second layer if the back looks plain or reversed.

If the job needs it, yes. For signs fixed to a building, anything illuminated or work at height, we arrange a survey to measure, check the wall and plan access. For window graphics, lettering and many vehicle jobs, clear photos with measurements are often enough, and we only visit if something needs a closer look.

Fitting is typically scheduled once three things are in place: you have approved the proof, the materials are made or delivered, and any consent the job needs has been granted. For many jobs that is typically a few weeks from approval; illuminated or larger fabricated signs typically take longer, and consent decisions run to their own timetable.

Guide pricing runs from £65 to £180 per pane, plus VAT. The main things that move it are dimensions, the material and finish, illumination where relevant, how high the work is and whether a scaffold or platform is needed. Your written quote, issued after a survey or a check of your artwork, replaces the guide figure.

Usually not as a lasting answer. Tape and stickers are a stopgap: they peel, fade and often cover only one height or part of the width. Durable film markings running across the glass in both zones are far more likely to be noticed.

England's Approved Document K suggests two zones: 850–1000 mm and 1400–1600 mm above floor level. Wales, Scotland and Northern Ireland have their own building guidance with the same aim. We measure from the finished floor and set markings within those bands across each pane.