Frosted window film in Briton Ferry

Fitting is typically scheduled once three things are in place: you have approved the proof, the materials are made or delivered, and any consent the job needs has been granted. For many jobs that is typically a few weeks from approval; illuminated or larger fabricated signs typically take longer, and consent decisions run to their own timetable.

As a guide, £32–£68 per m² + VAT. Where your job falls in that range depends on size, materials, access height, whether old signage has to come off and how much design work is involved. We confirm a fixed price after a survey or artwork check, before anything is ordered.

Very nearly. From normal viewing distances, a good etch-effect film looks like sandblasted or acid-etched glass; up close, the film edge and a slight sheen can give it away. Unlike etching, it goes onto existing glass and can be removed or changed later.

Yes, it's a common use. Choose a denser film for full privacy, especially in rooms used after dark. Condensation doesn't harm properly fitted film, but wipe it down and keep the room ventilated so the edges aren't left wet for long periods.

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

Plain frosted film has a guide price of £32–£48 per m², and film with a cut-out design £45–£68 per m², supplied and fitted, excluding VAT. Small jobs have a £225 + VAT minimum. Your fixed price is confirmed after a survey and design approval.