Frosted window film in Bridgend

Very nearly. From normal viewing distances, a good etch-effect film looks like sandblasted or acid-etched glass; up close, the film edge and a slight sheen can give it away. Unlike etching, it goes onto existing glass and can be removed or changed later.

If the job needs it, yes. For signs fixed to a building, anything illuminated or work at height, we arrange a survey to measure, check the wall and plan access. For window graphics, lettering and many vehicle jobs, clear photos with measurements are often enough, and we only visit if something needs a closer look.

A few meeting rooms are typically fitted in a day once the glass is clean. Long partition runs, intricate cut designs or high glazing take longer. Fitting can often be arranged early, late or at weekends so meetings carry on as normal.

Guide pricing runs from £32 to £68 per m², plus VAT. The main things that move it are dimensions, the material and finish, illumination where relevant, how high the work is and whether a scaffold or platform is needed. Your written quote, issued after a survey or a check of your artwork, replaces the guide figure.

Yes, it's a common use. Choose a denser film for full privacy, especially in rooms used after dark. Condensation doesn't harm properly fitted film, but wipe it down and keep the room ventilated so the edges aren't left wet for long periods.

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.