Frosted window film in Cookstown

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

Very nearly. From normal viewing distances, a good etch-effect film looks like sandblasted or acid-etched glass; up close, the film edge and a slight sheen can give it away. Unlike etching, it goes onto existing glass and can be removed or changed later.

A few meeting rooms are typically fitted in a day once the glass is clean. Long partition runs, intricate cut designs or high glazing take longer. Fitting can often be arranged early, late or at weekends so meetings carry on as normal.

It can. Not every job needs an application, but where express consent is required the council's decision typically takes several weeks, and fitting typically waits until it is granted. We check this at the start, so the timetable you receive with your quote allows for consent where it applies, along with the proof approval stage.

No. Our guide range of £32–£68 per m² excludes VAT, which is added to the quote. The final figure depends on size, materials, access, removal of existing signage or graphics and the artwork needed, and we confirm it in writing after a survey or once we have checked your files.

Plain frosted film has a guide price of £32–£48 per m², and film with a cut-out design £45–£68 per m², supplied and fitted, excluding VAT. Small jobs have a £225 + VAT minimum. Your fixed price is confirmed after a survey and design approval.