How do you keep colours consistent across the fleet?

By fixing the film and print references at the start and recording them. Solid-colour vinyl is chosen from a fixed range, and printed colours are matched to your references and proofed on the actual film. Small variations between print batches can occur, so replacement panels are checked against the graphics already fitted.

Should Chapter 8 chevrons be part of the livery?

If your vehicles stop or work on the highway and your contracts ask for them, yes. It's better to design the rear doors with the chevron area set aside than to add chevrons later over the branding. The livery then keeps the name and phone number clear of the markings, and the rear still carries your brand.

Can cars and vans in one fleet carry different levels of graphics?

Yes, and it's common. Pool cars might carry a logo and web address on the doors, vans a part wrap with services and phone number, and trucks larger side graphics. The colours, typefaces and logo placement stay consistent, so every vehicle still reads as the same business.

Who carries out the work on fleet livery in Bath?

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

What makes fleet livery more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Bath is £225–£1,650 per vehicle + VAT, confirmed after a survey or artwork check.

How long does it take to get fleet livery in Bath?

It typically takes a few weeks from first enquiry, with much of that time falling after you approve the proof, while the work is made and scheduled. Graphics and vehicle jobs are typically shorter than fabricated or illuminated signs. If advertisement consent is needed, the council's decision comes first and adds to the overall timescale.

Fleet livery in Bath | Smart Signs

Fleet livery is a consistent set of vehicle graphics, produced from master templates for each vehicle model, so every van, car, truck or trailer a business runs carries the same branding in the same position.

Why choose fleet livery for a business in Bath?

When several of your vans park at one Bath site, matching livery makes the job look organised to the client and to passers-by.
Mixed fleets in Bath, with managers' cars, engineers' vans and a tipper for the yard, can share one look adapted to each vehicle.
Adding a new van to a Bath operation is simpler when the master template already exists, because it's printed and fitted to match the rest.

What fleet livery costs in Bath

Below is the guide pricing we use for fleet livery: from £225 up to £1,650 per vehicle, before VAT. These are not fixed quotes. A written price follows once measurements are taken and your artwork has been checked.

Fleet livery in Bath: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Lettering-led livery, per vehicle	£225 – £595	£270 – £714
Part-wrap livery, per vehicle	£695 – £1,650	£834 – £1,980
Fleet design and template set-up (one-off)	£195 – £650	£234 – £780

The per-vehicle cost depends on vehicle sizes, coverage, how many different models need templates, where fitting happens and whether old graphics come off first. These are guide figures excluding VAT; your per-vehicle price is confirmed from the vehicle list and approved artwork.

Options for your Bath project

Part-wrap livery

Printed graphics on the sides and rear, with the factory colour as background.

Lettering-led livery

Cut vinyl name, services and contact details applied identically to each vehicle.

Mixed fleet scheme

One brand look adapted for cars, vans, trucks and trailers.

Rules for vehicle graphics in Bath

For vehicles, the paperwork is about DVLA and your insurer, not the planning department. Graphics on a van or car that is normally driven around fall outside advertisement control; only a vehicle parked mainly as an advertising hoarding is caught. A change of main colour means updating the colour on your V5C and telling your insurer. We leave the windscreen and front side windows clear, because the Construction and Use Regulations 1986 require at least 75% and 70% light through them, and we check the paint is sound factory finish before wrapping. If the vehicle is leased, confirm the lease permits graphics and how they must come off.

Covering Bath and Somerset

Coverage is nationwide, which means Bath and the surrounding parts of Somerset are included as standard. Anything fixed to a building normally needs someone on site to measure and check fixings and access; simpler graphics can usually be quoted from images you send. The Bath postcode districts we quote for include BA1 and BA2. Roughly 41 miles separate Bath from Taunton, which lies to the south-west.

Neighbouring towns

Tell us what you have in mind for fleet livery in Bath. Snap the frontage, window or vehicle, add approximate sizes and send it over. Your quote is free, and the proof always comes before any making.

More signs in Bath

All sign types in Bath · Fleet livery across Somerset

Materials	Cut and printed cast vinyl, laminated, colour-matched to your brand guidelines
Typical size	From two vehicles to mixed fleets of cars, vans, trucks and trailers
Consent	Not usually needed for working vehicles; a main-colour change means a V5C update

Fleet livery in Bath