How do you keep colours consistent across the fleet?

By fixing the film and print references at the start and recording them. Solid-colour vinyl is chosen from a fixed range, and printed colours are matched to your references and proofed on the actual film. Small variations between print batches can occur, so replacement panels are checked against the graphics already fitted.

Could the consent process affect the timing of my job in Potters Bar?

It can. Not every job needs an application, but where express consent is required the council's decision typically takes several weeks, and fitting typically waits until it is granted. We check this at the start, so the timetable you receive with your quote allows for consent where it applies, along with the proof approval stage.

Will someone visit my premises in Potters Bar before quoting?

If the job needs it, yes. For signs fixed to a building, anything illuminated or work at height, we arrange a survey to measure, check the wall and plan access. For window graphics, lettering and many vehicle jobs, clear photos with measurements are often enough, and we only visit if something needs a closer look.

Does the price of fleet livery in Potters Bar include VAT?

No. Our guide range of £225–£1,650 per vehicle excludes VAT, which is added to the quote. The final figure depends on size, materials, access, removal of existing signage or graphics and the artwork needed, and we confirm it in writing after a survey or once we have checked your files.

Should Chapter 8 chevrons be part of the livery?

If your vehicles stop or work on the highway and your contracts ask for them, yes. It's better to design the rear doors with the chevron area set aside than to add chevrons later over the branding. The livery then keeps the name and phone number clear of the markings, and the rear still carries your brand.

Can cars and vans in one fleet carry different levels of graphics?

Yes, and it's common. Pool cars might carry a logo and web address on the doors, vans a part wrap with services and phone number, and trucks larger side graphics. The colours, typefaces and logo placement stay consistent, so every vehicle still reads as the same business.

Fleet livery in Potters Bar

Fleet livery is a consistent set of vehicle graphics, produced from master templates for each vehicle model, so every van, car, truck or trailer a business runs carries the same branding in the same position.

Fleet livery in Potters Bar: the practical benefits

Mixed fleets in Potters Bar, with managers' cars, engineers' vans and a tipper for the yard, can share one look adapted to each vehicle.
Where we can arrange fitting at your depot, vehicles kept in Potters Bar can be liveried in batches between shifts instead of being driven away.
Vehicles going back to lease companies from a Potters Bar depot need graphics removed cleanly, so planning de-fleet removal early avoids surprises.

What fleet livery costs in Potters Bar

The table shows guide prices for fleet livery, starting from £225 and reaching about £1,650 per vehicle. All figures exclude VAT. Your own price is confirmed after we have seen the site or the artwork, so treat these as a starting point.

Fleet livery in Potters Bar: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Lettering-led livery, per vehicle	£225 – £595	£270 – £714
Part-wrap livery, per vehicle	£695 – £1,650	£834 – £1,980
Fleet design and template set-up (one-off)	£195 – £650	£234 – £780

The per-vehicle cost depends on vehicle sizes, coverage, how many different models need templates, where fitting happens and whether old graphics come off first. These are guide figures excluding VAT; your per-vehicle price is confirmed from the vehicle list and approved artwork.

Options for your Potters Bar project

Full-wrap livery

Every vehicle wrapped in brand colours, useful when vehicles arrive in mixed colours.

Part-wrap livery

Printed graphics on the sides and rear, with the factory colour as background.

De-fleet removal

Livery taken off in batches as vehicles are sold or returned.

Rules for vehicle graphics in Potters Bar

For vehicles, the paperwork is about DVLA and your insurer, not the planning department. Graphics on a van or car that is normally driven around fall outside advertisement control; only a vehicle parked mainly as an advertising hoarding is caught. A change of main colour means updating the colour on your V5C and telling your insurer. We leave the windscreen and front side windows clear, because the Construction and Use Regulations 1986 require at least 75% and 70% light through them, and we check the paint is sound factory finish before wrapping. If the vehicle is leased, confirm the lease permits graphics and how they must come off.

Covering Potters Bar and Hertfordshire

Yes, Potters Bar is covered, as is the rest of Hertfordshire. For signs that are fixed to a wall or wired in, we arrange a visit to survey first. For window film, lettering or vehicle graphics, a set of photos with measurements is often all we need to put a price together. Around Potters Bar, that covers postcode districts such as EN6. Roughly 9.7 miles separate Potters Bar from Watford, which lies to the west.

Close to Potters Bar

Free quotes for fleet livery start with your pictures. Measure roughly, take a few shots from the street or around the vehicle, and send them to us. We prepare a proof for you to approve before anything is produced.

More signs in Potters Bar

All sign types in Potters Bar · Fleet livery across Hertfordshire

Fixing / installation	We can usually arrange fitting at your depot, under cover, in batches
Typical lead time	typically 2–4 weeks for templates and proofs; roll-out phased to your schedule
Consent	Not usually needed for working vehicles; a main-colour change means a V5C update