Can you fix letters to a slatted timber or acoustic wall?

Yes. Letters are pinned or studded into the slats themselves, with the template used to line them up across the gaps so no fixing lands on empty space. Thin strokes may need a backing strip or a heavier font weight to span the slats securely.

Will flat-cut letters damage my wall?

Fixing needs small holes for studs, and adhesive can pull paint when letters are removed. On leased premises, check what your lease allows; we can fix with studs only, so the holes are small and simple to fill when you move out.

What do you need from me to quote for flat-cut letters in Corby?

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

What can delay flat-cut letters in Corby?

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.

What is the price of flat-cut letters for a business in Corby?

Guide pricing runs from £18 to £65 per letter, plus VAT. The main things that move it are dimensions, the material and finish, illumination where relevant, how high the work is and whether a scaffold or platform is needed. Your written quote, issued after a survey or a check of your artwork, replaces the guide figure.

Can flat-cut letters be used for room names and wayfinding?

Yes. The same cutting suits meeting-room names, floor numbers and directional arrows, so internal signs match your reception lettering. Keeping one material, colour and font throughout makes a building feel consistent, and every sign is set out from one drawing for matching heights.

Flat-cut letters in Corby

Flat-cut letters are individual letters and logos cut from a single solid sheet, typically 5–10 mm acrylic, aluminium composite or metal, and fixed flush to a wall or held off it on stand-offs.

Points in favour of flat-cut letters in Corby

Companies hosting clients in Corby meeting rooms can brand the space with a flat-cut logo rather than printed graphics that date.
A serviced office or co-working space in Corby may want a crisp reception name that can change as tenants move on.
Shopfitters and interior designers working on Corby fit-outs can specify flat-cut letters to the exact RAL or Pantone colour.

What flat-cut letters cost in Corby

Guide prices for flat-cut letters run from £18 to £65 per letter, excluding VAT. The table below breaks that down; your actual price is fixed in writing once we have surveyed the site or checked the artwork.

Flat-cut letters in Corby: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Flat-cut letter, 300 mm tall	£18 – £65	£21.60 – £78
Typical reception or fascia name set	£320 – £1,200	£384 – £1,440
Fitting template and locators	£45 – £120	£54 – £144

Letters around 300 mm tall are guided at £18 to £65 each, supplied and fitted, excluding VAT. A typical reception or fascia name set is guided at £320 to £1,200, and a fitting template with locators adds a guide £45 to £120.

Options for your Corby project

Stand-off mounted set

Letters held off the wall for shadow and easy levelling.

Acrylic letters

Solid-colour or clear acrylic in gloss or matt, for receptions and sheltered exteriors.

Mirror or metallic effect

Reflective faces for a striking reception wall.

Do you need permission for a sign in Corby?

In England, a non-illuminated sign on your own business premises usually falls under deemed consent, which means no application is needed provided the sign stays within set limits. The lettering and symbols should be no more than 0.75 m tall (0.3 m in an area of special control), and the top of the sign should sit no higher than the bottom of any first-floor window. Conservation areas and listed buildings need more care: a sign on a listed building usually also needs listed building consent. We check the position for your premises before you commit, and we can prepare the drawings and photos for an application or submit it for you.

Covering Corby and Northamptonshire

Smart Signs works throughout Northamptonshire, Corby included, and across the rest of the country. A survey visit is arranged for fitted and illuminated signs so nothing is guessed. Window, wall and vehicle graphics can usually be priced remotely from good photos and accurate measurements. Around Corby, that covers postcode districts such as NN17 and NN18. Roughly 19 miles separate Corby from Northampton, which lies to the south-west.

Also within reach of Corby

Flat-cut letters in Uppingham 6 mi
Flat-cut letters in Kettering 7 mi
Flat-cut letters in Market Harborough 10 mi
Flat-cut letters in Oakham 12 mi
Flat-cut letters in Wellingborough 13 mi

Ask for a free quote on flat-cut letters in Corby today. A couple of snapshots and rough dimensions help us price accurately, and you sign off the proof before we order or make anything.

More signs in Corby

All sign types in Corby · Flat-cut letters across Northamptonshire

Typical size	Letters around 300 mm tall, 5–10 mm thick
Typical lead time	typically 1–3 weeks from proof approval to fitting
Consent	Indoor letters usually excluded; exterior letters often deemed in England within limits