How small can flat-cut letters be?

Small letters can be cut, but very thin strokes become fragile and hard to fix securely. A strapline under a logo is usually better in vinyl or printed on a panel, with flat-cut kept for the main name and logo. We check stroke widths on your artwork first.

Is there a typical lead time for flat-cut letters in Rhondda?

Yes, though it varies with the job. The lead time typically runs from the day you approve the proof, not from the first enquiry, and is typically a few weeks. Survey visits, artwork changes and any consent application sit before that point, so getting photos, sizes and logo files to us early typically shortens the overall timescale.

Can you fix letters to a slatted timber or acoustic wall?

Yes. Letters are pinned or studded into the slats themselves, with the template used to line them up across the gaps so no fixing lands on empty space. Thin strokes may need a backing strip or a heavier font weight to span the slats securely.

Can I get a fixed price for flat-cut letters in Rhondda before committing?

Yes. We start from the guide range, £18 to £65 per letter excluding VAT, then measure up or look at your photos and artwork. That gives a fixed written price reflecting the real size, materials, access and any design or consent work. You only commit once you accept that price and approve the proof.

What do you need from me to quote for flat-cut letters in Rhondda?

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

How thick should flat-cut letters be?

For most receptions, 5 mm suits smaller text and 10 mm suits main names and logos. Outside, the thicker end of the range is safer because it resists bowing and shows a visible edge from the side. Very large letters usually move into metal or built-up construction.

Flat-cut letters in Mid Glamorgan

Flat-cut letters are individual letters and logos cut from a single solid sheet, typically 5–10 mm acrylic, aluminium composite or metal, and fixed flush to a wall or held off it on stand-offs.

Why choose flat-cut letters in Mid Glamorgan?

In a shared Rhondda office building, a name on the wall beside your door helps visitors find you on the right floor.
Small firms moving into a new Rhondda unit can start with flat-cut letters at reception, adding exterior signs once the lease is settled.
Inside a Rhondda clinic or practice, letters behind the reception desk tell visitors they are in the right place straight away.

Guide prices in Mid Glamorgan

Below is the guide pricing we use for flat-cut letters: from £18 up to £65 per letter, before VAT. These are not fixed quotes. A written price follows once measurements are taken and your artwork has been checked.

Flat-cut letters in Mid Glamorgan: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Flat-cut letter, 300 mm tall	£18 – £65	£21.60 – £78
Typical reception or fascia name set	£320 – £1,200	£384 – £1,440
Fitting template and locators	£45 – £120	£54 – £144

Letters around 300 mm tall are guided at £18 to £65 each, supplied and fitted, excluding VAT. A typical reception or fascia name set is guided at £320 to £1,200, and a fitting template with locators adds a guide £45 to £120.

Do you need permission for a sign in Mid Glamorgan?

Wales still uses the Town and Country Planning (Control of Advertisements) Regulations 1992, as amended. The system looks similar to England's, with some signs allowed under deemed consent and others needing express consent from the council, but the details differ, so we check with the local planning authority rather than assume English limits apply. On a listed building, listed building consent is usually needed as well, and works without it can be a criminal offence. We look at your premises before you commit and can prepare drawings and photos for an application, or submit it for you.

Options worth considering

Solid metal letters

Aluminium, stainless or brass-effect sheet with a crisp metal edge.

Vinyl-faced letters

Clear or white letters faced with vinyl for exact brand colours.

Aluminium composite letters

Light, rigid letters, a cost-effective choice for exterior fascias.

Towns in Mid Glamorgan

We take on flat-cut letters in all of these towns across Mid Glamorgan, and in the smaller places, estates and business parks between them. Select a town to open its own page.

Anywhere in Mid Glamorgan, the first step is the same: send photos and rough sizes for a free quote on flat-cut letters. You approve a proof to scale before anything is made.