Can you fix letters to a slatted timber or acoustic wall?

Yes. Letters are pinned or studded into the slats themselves, with the template used to line them up across the gaps so no fixing lands on empty space. Thin strokes may need a backing strip or a heavier font weight to span the slats securely.

What is the typical timescale for flat-cut letters from enquiry to fitting?

A quote typically follows once we have your photos or have surveyed the site, and making and fitting is typically booked a few weeks after you approve the proof. Where advertisement consent applies, that decision has to come through before anything goes up, which can add several weeks. We give you an expected timescale with your quote for Liverpool.

Why is there a price range for flat-cut letters rather than one figure?

Because jobs vary. The guide of £18 to £65 per letter + VAT spans small, simple work at one end and larger, more involved work at the other. Size, material, finish, access, design time and any consent drawings push the figure up or down. A survey or artwork check lets us fix the price for your job in Liverpool.

How thick should flat-cut letters be?

For most receptions, 5 mm suits smaller text and 10 mm suits main names and logos. Outside, the thicker end of the range is safer because it resists bowing and shows a visible edge from the side. Very large letters usually move into metal or built-up construction.

What do you need from me to quote for flat-cut letters in Liverpool?

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

Can flat-cut letters be used for room names and wayfinding?

Yes. The same cutting suits meeting-room names, floor numbers and directional arrows, so internal signs match your reception lettering. Keeping one material, colour and font throughout makes a building feel consistent, and every sign is set out from one drawing for matching heights.

Flat-cut letters in Merseyside

Flat-cut letters are individual letters and logos cut from a single solid sheet, typically 5–10 mm acrylic, aluminium composite or metal, and fixed flush to a wall or held off it on stand-offs.

Why choose flat-cut letters in Merseyside?

In a shared Liverpool office building, a name on the wall beside your door helps visitors find you on the right floor.
Small firms moving into a new Liverpool unit can start with flat-cut letters at reception, adding exterior signs once the lease is settled.
For a Liverpool salon or studio on a modest budget, matte black acrylic on a pale wall gives a designed look without fabrication costs.

Guide prices in Merseyside

Budgeting for flat-cut letters? The guide below runs from £18 to £65 per letter. VAT is extra. Size, materials and access decide where your job lands, and we confirm it in writing after surveying or checking the artwork.

Flat-cut letters in Merseyside: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Flat-cut letter, 300 mm tall	£18 – £65	£21.60 – £78
Typical reception or fascia name set	£320 – £1,200	£384 – £1,440
Fitting template and locators	£45 – £120	£54 – £144

Letters around 300 mm tall are guided at £18 to £65 each, supplied and fitted, excluding VAT. A typical reception or fascia name set is guided at £320 to £1,200, and a fitting template with locators adds a guide £45 to £120.

Do you need permission for a sign in Merseyside?

In England, a non-illuminated sign on your own business premises usually falls under deemed consent, which means no application is needed provided the sign stays within set limits. The lettering and symbols should be no more than 0.75 m tall (0.3 m in an area of special control), and the top of the sign should sit no higher than the bottom of any first-floor window. Conservation areas and listed buildings need more care: a sign on a listed building usually also needs listed building consent. We check the position for your premises before you commit, and we can prepare the drawings and photos for an application or submit it for you.

Options worth considering

Acrylic letters

Solid-colour or clear acrylic in gloss or matt, for receptions and sheltered exteriors.

Solid metal letters

Aluminium, stainless or brass-effect sheet with a crisp metal edge.

Aluminium composite letters

Light, rigid letters, a cost-effective choice for exterior fascias.

Towns in Merseyside

We take on flat-cut letters in all of these towns across Merseyside, and in the smaller places, estates and business parks between them. Select a town to open its own page.

A free, written quote for flat-cut letters is one message away. Send the details from anywhere in Merseyside and we will reply with a price, then a proof you approve before work begins.