What is the typical timescale for flat-cut letters from enquiry to fitting?

A quote typically follows once we have your photos or have surveyed the site, and making and fitting is typically booked a few weeks after you approve the proof. Where advertisement consent applies, that decision has to come through before anything goes up, which can add several weeks. We give you an expected timescale with your quote for Brighton.

Can you fix letters to a slatted timber or acoustic wall?

Yes. Letters are pinned or studded into the slats themselves, with the template used to line them up across the gaps so no fixing lands on empty space. Thin strokes may need a backing strip or a heavier font weight to span the slats securely.

Will flat-cut letters damage my wall?

Fixing needs small holes for studs, and adhesive can pull paint when letters are removed. On leased premises, check what your lease allows; we can fix with studs only, so the holes are small and simple to fill when you move out.

Can flat-cut letters go on glass?

Yes. On a glass partition or screen, letters are bonded with a clear adhesive made for glass, and the back of each letter is visible from the other side, so it is finished to look tidy from both directions. A frosted band behind can hide the adhesive.

What do you need from me to quote for flat-cut letters in Brighton?

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

Is there a guide price for flat-cut letters in Brighton?

Yes: £18–£65 per letter + VAT is our guide range. It is not a fixed quote, because no two jobs are the same size or on the same surface. The area covered, materials, the number of letters or panels, removal of anything old and access all change the figure, which we confirm after seeing the site or artwork.

Flat-cut letters in East Sussex

Flat-cut letters are individual letters and logos cut from a single solid sheet, typically 5–10 mm acrylic, aluminium composite or metal, and fixed flush to a wall or held off it on stand-offs.

Why choose flat-cut letters in East Sussex?

Inside a Brighton clinic or practice, letters behind the reception desk tell visitors they are in the right place straight away.
For a Brighton salon or studio on a modest budget, matte black acrylic on a pale wall gives a designed look without fabrication costs.
Ground-floor shops in Brighton can mount 10 mm metal letters on stand-offs over a painted fascia, getting depth for less.

Guide prices in East Sussex

Budgeting for flat-cut letters? The guide below runs from £18 to £65 per letter. VAT is extra. Size, materials and access decide where your job lands, and we confirm it in writing after surveying or checking the artwork.

Flat-cut letters in East Sussex: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Flat-cut letter, 300 mm tall	£18 – £65	£21.60 – £78
Typical reception or fascia name set	£320 – £1,200	£384 – £1,440
Fitting template and locators	£45 – £120	£54 – £144

Material and thickness drive most of the difference: acrylic and aluminium composite sit at the lower end, solid metal and mirror finishes at the top. Letter count and height, stand-offs, colour matching, the wall surface and access follow, and every price is confirmed after an artwork check and survey.

Do you need permission for a sign in East Sussex?

Advertisement consent in England comes from the Town and Country Planning (Control of Advertisements) (England) Regulations 2007. A sign is either excluded from control, has deemed consent, or needs express consent from the council's planning department. For a plain, unlit sign on your own premises, deemed consent usually applies when characters are 0.75 m tall or less (0.3 m in an area of special control) and the top edge is below the first-floor windows. Conservation areas need more care, and a listed building usually needs listed building consent as well; working without it can be a criminal offence. We confirm the route before you commit, and can prepare the drawings for an application or submit it for you.

Options worth considering

Aluminium composite letters

Light, rigid letters, a cost-effective choice for exterior fascias.

Stand-off mounted set

Letters held off the wall for shadow and easy levelling.

Vinyl-faced letters

Clear or white letters faced with vinyl for exact brand colours.

Towns in East Sussex

Below: towns across East Sussex where Smart Signs handles flat-cut letters. The service, the process and the guide prices are the same in each, and places missing from the list are covered as well.

Photos of the building, window or vehicle, plus approximate sizes, are enough for us to quote flat-cut letters anywhere in East Sussex. There is no charge for the quote and no commitment until you approve the proof.