Printed or vinyl lettering: which should I choose?

Choose cut vinyl for solid-colour text and simple logos, and a laminated print for gradients, photos or many colours. Vinyl looks crisp, and one line, such as a phone number, can be changed later; a print is replaced as a whole if anything changes.

Will a fascia sign cope with bad weather?

It should, if it is fixed properly. Aluminium composite does not rot or swell, and stainless fixings avoid the rust streaks that ordinary screws can leave. On older frontages the weak point is usually the board behind, so we check the top edge for water getting in and seal it.

Can you design the sign if I only have a logo?

Yes. Send whatever you have, even a photo of an old sign or a business card, and we lay out the name, logo and contact details on a scale drawing of your frontage. Vector files give the sharpest result; a low-resolution logo can be redrawn.

What can delay fascia signs in Nuneaton?

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.

Do you cover smaller places near Nuneaton as well?

Yes. Our coverage is not limited to Nuneaton itself: nearby towns, industrial estates and business parks across Warwickshire are included too. The process does not change with the postcode. Send photos and approximate sizes, and we will tell you whether a site visit is needed before we can give you a fixed price.

Can I get a fixed price for fascia signs in Nuneaton before committing?

Yes. We start from the guide range, £495 to £1,650 per sign excluding VAT, then measure up or look at your photos and artwork. That gives a fixed written price reflecting the real size, materials, access and any design or consent work. You only commit once you accept that price and approve the proof.

Fascia signs in Warwickshire

A fascia sign is the flat panel fixed along the board above a shop or office frontage, usually 3–4 mm aluminium composite carrying printed or cut-vinyl lettering, a logo and sometimes contact details.

Why choose fascia signs in Warwickshire?

Taking over an older unit in Nuneaton? A new panel can usually go straight over the existing fascia board, without stripping it out.
Retail park landlords often want drawings before approving signs, and a scale visual of your Nuneaton fascia gives them exactly that.
On a narrow street in Nuneaton, people read signs at an angle, so clear letterforms matter more than sheer size.

Guide prices in Warwickshire

Prices below are guides, not quotes: £495 to £1,650 per sign plus VAT, depending on size, materials and access. We confirm the exact figure after a survey or an artwork check, and it is agreed before anything is made.

Fascia signs in Warwickshire: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Aluminium composite fascia, up to 3 m	£495 – £950	£594 – £1,140
Aluminium composite fascia, 3–5 m	£750 – £1,650	£900 – £1,980
Remove and dispose of an old sign	£95 – £250	£114 – £300
Scaffold tower or access platform, per day (if needed)	£150 – £450	£180 – £540

Guide prices, supplied and fitted and excluding VAT, are £495 to £950 for an aluminium composite fascia up to 3 m and £750 to £1,650 for 3–5 m. Full-colour prints and colour-matched trims sit toward the top of each range.

Do you need permission for a sign in Warwickshire?

Will you need permission? For a non-illuminated sign at your own business address in England, usually not, as long as it stays inside the deemed consent limits: letters no taller than 0.75 m (0.3 m in an area of special control) and nothing above the bottom of a first-floor window. Historic streets need more care. In a conservation area the details matter more, and fixing to a listed building usually needs listed building consent, with fixings into mortar joints rather than brick or stone faces generally preferred. We check with you before anything is ordered, and can prepare drawings and photos for an application, or submit it for you.

Options worth considering

Re-skin of an old sign

A new face fixed over a sound existing sign frame.

Panel with edge trim

An aluminium trim frames the panel and hides the fixings.

Mineral-core panel

Specified where a landlord or building control asks for one.

Towns in Warwickshire

Main towns in Warwickshire where we design, make and fit signage, including fascia signs. Select yours, or simply get in touch if your town or village is missing from the list.

Start your fascia signs enquiry for Warwickshire now: images and rough measurements help us price accurately. Quotes cost nothing, and you see and approve the design before production starts.