A fascia sign is the flat panel fixed along the board above a shop or office frontage, usually 3–4 mm aluminium composite carrying printed or cut-vinyl lettering, a logo and sometimes contact details.
Good reasons to look at fascia signs in Sheffield
- Where footfall on a Sheffield high street is heavy, a clean, high-contrast fascia is often read before passers-by notice the window display.
- Rebranding a Sheffield business is simpler with a flat panel, because vinyl lettering can be updated without replacing the whole sign.
- Takeaways and cafés in Sheffield trading into the evening can pair a flat fascia with LED trough lighting instead of a lightbox.
What fascia signs cost in Sheffield
The table shows guide prices for fascia signs, starting from £495 and reaching about £1,650 per sign. All figures exclude VAT. Your own price is confirmed after we have seen the site or the artwork, so treat these as a starting point.
| Item | Guide, ex VAT | Inc. VAT (20%) |
|---|---|---|
| Aluminium composite fascia, up to 3 m | £495 – £950 | £594 – £1,140 |
| Aluminium composite fascia, 3–5 m | £750 – £1,650 | £900 – £1,980 |
| Remove and dispose of an old sign | £95 – £250 | £114 – £300 |
| Scaffold tower or access platform, per day (if needed) | £150 – £450 | £180 – £540 |
Removing and disposing of an old sign is guided at £95 to £250, and a scaffold tower or access platform, if needed, at £150 to £450 per day, both excluding VAT. Repairs to the board are priced only if the survey shows they are needed, and every figure is confirmed after survey and an artwork check.
Options for your Sheffield project
Panel with trough lighting
A flat panel lit by LED trough lights or spotlights after dark.
Printed panel
Full-colour laminated print on aluminium composite, for logos, photos and gradients.
Re-skin of an old sign
A new face fixed over a sound existing sign frame.
Do you need permission for a sign in Sheffield?
In England, a non-illuminated sign on your own business premises usually falls under deemed consent, which means no application is needed provided the sign stays within set limits. The lettering and symbols should be no more than 0.75 m tall (0.3 m in an area of special control), and the top of the sign should sit no higher than the bottom of any first-floor window. Conservation areas and listed buildings need more care: a sign on a listed building usually also needs listed building consent. We check the position for your premises before you commit, and we can prepare the drawings and photos for an application or submit it for you.
Covering Sheffield and South Yorkshire
From the middle of Sheffield to the edges of South Yorkshire, the same survey, proof and fit process applies. If the job calls for someone on site, a visit is booked; if not, we price from photos, measurements and your artwork, then confirm the details once the artwork is checked. Around Sheffield, that covers postcode districts such as S1, S3, S2 and S4.
Neighbouring towns
- Fascia signs in Burngreave 1 mi
- Fascia signs in Nether Edge 2 mi
- Fascia signs in Rotherham 6 mi
- Fascia signs in Dronfield 6 mi
- Fascia signs in Chapeltown 6 mi
Free quotes for fascia signs start with your pictures. Measure roughly, take a few shots from the street or around the vehicle, and send them to us. We prepare a proof for you to approve before anything is produced.
More signs in Sheffield
- Van wraps in Sheffield
- Wall graphics and murals in Sheffield
- Totem and pylon signs in Sheffield
- Glass manifestation in Sheffield
- LED neon signs in Sheffield
- Vehicle wrap and graphics removal in Sheffield
- Illuminated built-up letters in Sheffield
- Fleet livery in Sheffield
All sign types in Sheffield · Fascia signs across South Yorkshire