Can a sign go above a roller shutter box?

Yes. Shutter boxes often sit just under or across the fascia, so we measure around them at survey. The panel can sit above the box, or cover it with a removable section so the shutter can still be serviced. Tell us if the motor needs access.

Can I get a fixed price for fascia signs in Taunton before committing?

Yes. We start from the guide range, £495 to £1,650 per sign excluding VAT, then measure up or look at your photos and artwork. That gives a fixed written price reflecting the real size, materials, access and any design or consent work. You only commit once you accept that price and approve the proof.

Will a fascia sign cope with bad weather?

It should, if it is fixed properly. Aluminium composite does not rot or swell, and stainless fixings avoid the rust streaks that ordinary screws can leave. On older frontages the weak point is usually the board behind, so we check the top edge for water getting in and seal it.

Will someone visit my premises in Taunton before quoting?

If the job needs it, yes. For signs fixed to a building, anything illuminated or work at height, we arrange a survey to measure, check the wall and plan access. For window graphics, lettering and many vehicle jobs, clear photos with measurements are often enough, and we only visit if something needs a closer look.

Could the consent process affect the timing of my job in Taunton?

It can. Not every job needs an application, but where express consent is required the council's decision typically takes several weeks, and fitting typically waits until it is granted. We check this at the start, so the timetable you receive with your quote allows for consent where it applies, along with the proof approval stage.

Does my landlord need to approve the sign?

Check your lease first. Many parades, retail parks and managed estates set rules on sign size, colour, materials and lighting, and some want drawings approved in writing. We can supply a scale drawing and a visual of the sign on your frontage for them.

Fascia signs in Somerset

A fascia sign is the flat panel fixed along the board above a shop or office frontage, usually 3–4 mm aluminium composite carrying printed or cut-vinyl lettering, a logo and sometimes contact details.

Why choose fascia signs in Somerset?

For a Taunton unit in a conservation area, a matt panel with restrained lettering is often the easier design to agree.
On a narrow street in Taunton, people read signs at an angle, so clear letterforms matter more than sheer size.
If your Taunton shop is one of a parade, a well-proportioned panel can stand out without breaking the shared fascia line.

Guide prices in Somerset

Guide prices for fascia signs run from £495 to £1,650 per sign, excluding VAT. The table below breaks that down; your actual price is fixed in writing once we have surveyed the site or checked the artwork.

Fascia signs in Somerset: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Aluminium composite fascia, up to 3 m	£495 – £950	£594 – £1,140
Aluminium composite fascia, 3–5 m	£750 – £1,650	£900 – £1,980
Remove and dispose of an old sign	£95 – £250	£114 – £300
Scaffold tower or access platform, per day (if needed)	£150 – £450	£180 – £540

Removing and disposing of an old sign is guided at £95 to £250, and a scaffold tower or access platform, if needed, at £150 to £450 per day, both excluding VAT. Repairs to the board are priced only if the survey shows they are needed, and every figure is confirmed after survey and an artwork check.

Do you need permission for a sign in Somerset?

In England, a non-illuminated sign on your own business premises usually falls under deemed consent, which means no application is needed provided the sign stays within set limits. The lettering and symbols should be no more than 0.75 m tall (0.3 m in an area of special control), and the top of the sign should sit no higher than the bottom of any first-floor window. Conservation areas and listed buildings need more care: a sign on a listed building usually also needs listed building consent. We check the position for your premises before you commit, and we can prepare the drawings and photos for an application or submit it for you.

Options worth considering

Panel with edge trim

An aluminium trim frames the panel and hides the fixings.

Re-skin of an old sign

A new face fixed over a sound existing sign frame.

Panel with trough lighting

A flat panel lit by LED trough lights or spotlights after dark.

Towns in Somerset

Towns in Somerset we cover for fascia signs are listed below. Each has its own page with guide prices and the steps involved, and if your town is not listed, we still cover it.

A free, written quote for fascia signs is one message away. Send the details from anywhere in Somerset and we will reply with a price, then a proof you approve before work begins.