Does the price of fascia signs in Leicester include VAT?

No. Our guide range of £495–£1,650 per sign excludes VAT, which is added to the quote. The final figure depends on size, materials, access, removal of existing signage or graphics and the artwork needed, and we confirm it in writing after a survey or once we have checked your files.

What can delay fascia signs in Leicester?

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.

Can you design the sign if I only have a logo?

Yes. Send whatever you have, even a photo of an old sign or a business card, and we lay out the name, logo and contact details on a scale drawing of your frontage. Vector files give the sharpest result; a low-resolution logo can be redrawn.

How long does a fascia sign take?

A flat fascia is typically made and fitted 2–3 weeks after you approve the proof, and fitting a single-storey frontage typically takes a few hours. If listed building or express advertisement consent is needed, the council decision comes first; express consent decisions usually take up to 8 weeks.

Will someone visit my premises in Leicester before quoting?

If the job needs it, yes. For signs fixed to a building, anything illuminated or work at height, we arrange a survey to measure, check the wall and plan access. For window graphics, lettering and many vehicle jobs, clear photos with measurements are often enough, and we only visit if something needs a closer look.

Will a fascia sign cope with bad weather?

It should, if it is fixed properly. Aluminium composite does not rot or swell, and stainless fixings avoid the rust streaks that ordinary screws can leave. On older frontages the weak point is usually the board behind, so we check the top edge for water getting in and seal it.

Fascia signs in Leicestershire

A fascia sign is the flat panel fixed along the board above a shop or office frontage, usually 3–4 mm aluminium composite carrying printed or cut-vinyl lettering, a logo and sometimes contact details.

Why choose fascia signs in Leicestershire?

Rebranding a Leicester business is simpler with a flat panel, because vinyl lettering can be updated without replacing the whole sign.
On a narrow street in Leicester, people read signs at an angle, so clear letterforms matter more than sheer size.
Takeaways and cafés in Leicester trading into the evening can pair a flat fascia with LED trough lighting instead of a lightbox.

Guide prices in Leicestershire

Use these figures to budget: £495 to £1,650 per sign is the guide range, with VAT added on top. Each line in the table is indicative only, and your exact price is confirmed after a survey or once we have looked over the artwork.

Fascia signs in Leicestershire: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Aluminium composite fascia, up to 3 m	£495 – £950	£594 – £1,140
Aluminium composite fascia, 3–5 m	£750 – £1,650	£900 – £1,980
Remove and dispose of an old sign	£95 – £250	£114 – £300
Scaffold tower or access platform, per day (if needed)	£150 – £450	£180 – £540

Removing and disposing of an old sign is guided at £95 to £250, and a scaffold tower or access platform, if needed, at £150 to £450 per day, both excluding VAT. Repairs to the board are priced only if the survey shows they are needed, and every figure is confirmed after survey and an artwork check.

Do you need permission for a sign in Leicestershire?

Will you need permission? For a non-illuminated sign at your own business address in England, usually not, as long as it stays inside the deemed consent limits: letters no taller than 0.75 m (0.3 m in an area of special control) and nothing above the bottom of a first-floor window. Historic streets need more care. In a conservation area the details matter more, and fixing to a listed building usually needs listed building consent, with fixings into mortar joints rather than brick or stone faces generally preferred. We check with you before anything is ordered, and can prepare drawings and photos for an application, or submit it for you.

Options worth considering

Printed panel

Full-colour laminated print on aluminium composite, for logos, photos and gradients.

Panel with trough lighting

A flat panel lit by LED trough lights or spotlights after dark.

Cut-vinyl lettering

Solid-colour vinyl letters on a coloured panel, easy to update later.

Towns in Leicestershire

Fascia signs across Leicestershire, town by town. Follow a link for the page covering your town; anywhere else in Leicestershire is handled in exactly the same way.

Ready when you are. Request a free quote for fascia signs in Leicestershire and attach whatever you have: snapshots, dimensions, a logo file. We send a scaled drawing, and nothing goes ahead without your sign-off.