Can you handle fascia signs for a business in Colne?

Yes. Smart Signs covers Colne and the rest of Lancashire as part of a UK-wide service. You send photos and rough sizes, we arrange a survey if the job needs one, then you receive a proof to scale and a fixed written price. Nothing is made or fitted until you have approved both.

Will a fascia sign cope with bad weather?

It should, if it is fixed properly. Aluminium composite does not rot or swell, and stainless fixings avoid the rust streaks that ordinary screws can leave. On older frontages the weak point is usually the board behind, so we check the top edge for water getting in and seal it.

Do I need to be there when the sign is fitted?

Not usually, as long as the frontage is accessible and power to any old sign lighting can be isolated. We agree the date with you, cone off and manage the pavement area while working, fit around your opening hours where access allows, and send photos once it is up.

Could the consent process affect the timing of my job in Colne?

It can. Not every job needs an application, but where express consent is required the council's decision typically takes several weeks, and fitting typically waits until it is granted. We check this at the start, so the timetable you receive with your quote allows for consent where it applies, along with the proof approval stage.

How long does a fascia sign take?

A flat fascia is typically made and fitted 2–3 weeks after you approve the proof, and fitting a single-storey frontage typically takes a few hours. If listed building or express advertisement consent is needed, the council decision comes first; express consent decisions usually take up to 8 weeks.

Can I get a fixed price for fascia signs in Colne before committing?

Yes. We start from the guide range, £495 to £1,650 per sign excluding VAT, then measure up or look at your photos and artwork. That gives a fixed written price reflecting the real size, materials, access and any design or consent work. You only commit once you accept that price and approve the proof.

Fascia signs in Colne

A fascia sign is the flat panel fixed along the board above a shop or office frontage, usually 3–4 mm aluminium composite carrying printed or cut-vinyl lettering, a logo and sometimes contact details.

Good reasons to look at fascia signs in Colne

Rebranding a Colne business is simpler with a flat panel, because vinyl lettering can be updated without replacing the whole sign.
On a narrow street in Colne, people read signs at an angle, so clear letterforms matter more than sheer size.
Retail park landlords often want drawings before approving signs, and a scale visual of your Colne fascia gives them exactly that.

What fascia signs cost in Colne

Prices below are guides, not quotes: £495 to £1,650 per sign plus VAT, depending on size, materials and access. We confirm the exact figure after a survey or an artwork check, and it is agreed before anything is made.

Fascia signs in Colne: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Aluminium composite fascia, up to 3 m	£495 – £950	£594 – £1,140
Aluminium composite fascia, 3–5 m	£750 – £1,650	£900 – £1,980
Remove and dispose of an old sign	£95 – £250	£114 – £300
Scaffold tower or access platform, per day (if needed)	£150 – £450	£180 – £540

Removing and disposing of an old sign is guided at £95 to £250, and a scaffold tower or access platform, if needed, at £150 to £450 per day, both excluding VAT. Repairs to the board are priced only if the survey shows they are needed, and every figure is confirmed after survey and an artwork check.

Options for your Colne project

Cut-vinyl lettering

Solid-colour vinyl letters on a coloured panel, easy to update later.

Panel with edge trim

An aluminium trim frames the panel and hides the fixings.

Printed panel

Full-colour laminated print on aluminium composite, for logos, photos and gradients.

Do you need permission for a sign in Colne?

In England, a non-illuminated sign on your own business premises usually falls under deemed consent, which means no application is needed provided the sign stays within set limits. The lettering and symbols should be no more than 0.75 m tall (0.3 m in an area of special control), and the top of the sign should sit no higher than the bottom of any first-floor window. Conservation areas and listed buildings need more care: a sign on a listed building usually also needs listed building consent. We check the position for your premises before you commit, and we can prepare the drawings and photos for an application or submit it for you.

Covering Colne and Lancashire

You do not need to be in a particular postcode for us to help: Colne and the whole of Lancashire are covered. If your job needs a survey, we arrange the visit. If it can be priced from photos, sizes and the vehicle make and model, we do it that way instead. Addresses in BB8 and BB9 are all within our Colne coverage. Colne lies around 23 miles east of Preston.

Nearby towns we also cover

Start with a free quote: a handful of photos plus approximate widths and heights is enough for fascia signs in Colne. You check and approve the proof, and only then is anything made.

More signs in Colne

All sign types in Colne · Fascia signs across Lancashire

Typical size	Up to about 5 m long; height set by the existing fascia board
Typical lead time	typically made and fitted 2–3 weeks after you approve the proof
Consent	Non-lit signs often have deemed consent in England; listed buildings usually need more