Can a sign go above a roller shutter box?

Yes. Shutter boxes often sit just under or across the fascia, so we measure around them at survey. The panel can sit above the box, or cover it with a removable section so the shutter can still be serviced. Tell us if the motor needs access.

Do I need to be there when the sign is fitted?

Not usually, as long as the frontage is accessible and power to any old sign lighting can be isolated. We agree the date with you, cone off and manage the pavement area while working, fit around your opening hours where access allows, and send photos once it is up.

Why is there a price range for fascia signs rather than one figure?

Because jobs vary. The guide of £495 to £1,650 per sign + VAT spans small, simple work at one end and larger, more involved work at the other. Size, material, finish, access, design time and any consent drawings push the figure up or down. A survey or artwork check lets us fix the price for your job in Watford.

Can you handle fascia signs for a business in Watford?

Yes. Smart Signs covers Watford and the rest of Hertfordshire as part of a UK-wide service. You send photos and rough sizes, we arrange a survey if the job needs one, then you receive a proof to scale and a fixed written price. Nothing is made or fitted until you have approved both.

When could work on fascia signs go ahead in Watford?

Fitting is typically scheduled once three things are in place: you have approved the proof, the materials are made or delivered, and any consent the job needs has been granted. For many jobs that is typically a few weeks from approval; illuminated or larger fabricated signs typically take longer, and consent decisions run to their own timetable.

Can you design the sign if I only have a logo?

Yes. Send whatever you have, even a photo of an old sign or a business card, and we lay out the name, logo and contact details on a scale drawing of your frontage. Vector files give the sharpest result; a low-resolution logo can be redrawn.

Fascia signs in Hertfordshire

A fascia sign is the flat panel fixed along the board above a shop or office frontage, usually 3–4 mm aluminium composite carrying printed or cut-vinyl lettering, a logo and sometimes contact details.

Why choose fascia signs in Hertfordshire?

If your Watford shop is one of a parade, a well-proportioned panel can stand out without breaking the shared fascia line.
Taking over an older unit in Watford? A new panel can usually go straight over the existing fascia board, without stripping it out.
For a Watford unit in a conservation area, a matt panel with restrained lettering is often the easier design to agree.

Guide prices in Hertfordshire

We publish guide prices so you can plan before you get in touch. For fascia signs the range is £495–£1,650 per sign, not including VAT, and the final price is confirmed after we survey the site or check the artwork.

Fascia signs in Hertfordshire: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Aluminium composite fascia, up to 3 m	£495 – £950	£594 – £1,140
Aluminium composite fascia, 3–5 m	£750 – £1,650	£900 – £1,980
Remove and dispose of an old sign	£95 – £250	£114 – £300
Scaffold tower or access platform, per day (if needed)	£150 – £450	£180 – £540

Guide prices, supplied and fitted and excluding VAT, are £495 to £950 for an aluminium composite fascia up to 3 m and £750 to £1,650 for 3–5 m. Full-colour prints and colour-matched trims sit toward the top of each range.

Do you need permission for a sign in Hertfordshire?

Will you need permission? For a non-illuminated sign at your own business address in England, usually not, as long as it stays inside the deemed consent limits: letters no taller than 0.75 m (0.3 m in an area of special control) and nothing above the bottom of a first-floor window. Historic streets need more care. In a conservation area the details matter more, and fixing to a listed building usually needs listed building consent, with fixings into mortar joints rather than brick or stone faces generally preferred. We check with you before anything is ordered, and can prepare drawings and photos for an application, or submit it for you.

Options worth considering

Panel with edge trim

An aluminium trim frames the panel and hides the fixings.

Printed panel

Full-colour laminated print on aluminium composite, for logos, photos and gradients.

Panel with trough lighting

A flat panel lit by LED trough lights or spotlights after dark.

Towns in Hertfordshire

Towns in Hertfordshire we cover for fascia signs are listed below. Each has its own page with guide prices and the steps involved, and if your town is not listed, we still cover it.

Tell us where you are in Hertfordshire and what you need. We quote for fascia signs free of charge, and the design proof always comes before any making or fitting.