Smart Signs logo

Fascia signs · Glasgow

Fascia signs in Glasgow

Getting fascia signs right comes down to accurate measuring, materials that suit the surface and a check of the rules before anything is ordered. That is how Smart Signs approaches every job in Glasgow and elsewhere in the UK: survey or photos first, then a scaled proof and a written quote, then making and fitting once you are happy.

From £495 per sign + VAT · UK guide price
Cream flat fascia sign with navy lettering 'THE CORNER DELI' above a deli shopfront.

A fascia sign is the flat panel fixed along the board above a shop or office frontage, usually 3–4 mm aluminium composite carrying printed or cut-vinyl lettering, a logo and sometimes contact details.

Where fascia signs can pay off in Glasgow

  • For a Glasgow unit in a conservation area, a matt panel with restrained lettering is often the easier design to agree.
  • Retail park landlords often want drawings before approving signs, and a scale visual of your Glasgow fascia gives them exactly that.
  • Taking over an older unit in Glasgow? A new panel can usually go straight over the existing fascia board, without stripping it out.

What fascia signs cost in Glasgow

Use these figures to budget: £495 to £1,650 per sign is the guide range, with VAT added on top. Each line in the table is indicative only, and your exact price is confirmed after a survey or once we have looked over the artwork.

Fascia signs in Glasgow: guide prices, supplied and fitted
ItemGuide, ex VATInc. VAT (20%)
Aluminium composite fascia, up to 3 m£495 – £950£594 – £1,140
Aluminium composite fascia, 3–5 m£750 – £1,650£900 – £1,980
Remove and dispose of an old sign£95 – £250£114 – £300
Scaffold tower or access platform, per day (if needed)£150 – £450£180 – £540

Guide prices, supplied and fitted and excluding VAT, are £495 to £950 for an aluminium composite fascia up to 3 m and £750 to £1,650 for 3–5 m. Full-colour prints and colour-matched trims sit toward the top of each range.

Options for your Glasgow project

Mineral-core panel

Specified where a landlord or building control asks for one.

Panel with edge trim

An aluminium trim frames the panel and hides the fixings.

Printed panel

Full-colour laminated print on aluminium composite, for logos, photos and gradients.

Do you need permission for a sign in Glasgow?

Different rules apply in Scotland. The 1984 Scotland Regulations decide whether a non-illuminated sign needs advertisement consent, and while some shop and office signs can go up without applying, the details are not the same as in England. Historic buildings deserve care: listed building consent is usually needed for signs on listed buildings under the 1997 Scotland Act, and carrying out works without it can be a criminal offence. We confirm what applies before you commit to fascia signs, then prepare drawings and photographs for an eDevelopment.scot application, or submit it on your behalf.

Covering Glasgow and Glasgow and Dunbartonshire

Businesses in Glasgow and elsewhere in Glasgow and Dunbartonshire get exactly the service offered in every other part of the UK. Signs fixed to a building are surveyed on site before we quote firmly. For graphics on glass, walls or vehicles, photos are often enough to start, and we visit only if something needs a closer look. In postcode terms, Glasgow jobs typically fall in G2, G4, G1 and G3.

Also within reach of Glasgow

No commitment and no charge for quoting. Send photos with rough sizes for fascia signs in Glasgow and we will reply with a price and then, once you are happy, a proof you approve before manufacture.

More signs in Glasgow

All sign types in Glasgow · Fascia signs across Glasgow and Dunbartonshire

Fascia signs in Glasgow: questions

Will a fascia sign cope with bad weather?

It should, if it is fixed properly. Aluminium composite does not rot or swell, and stainless fixings avoid the rust streaks that ordinary screws can leave. On older frontages the weak point is usually the board behind, so we check the top edge for water getting in and seal it.

Is there a typical lead time for fascia signs in Glasgow?

Yes, though it varies with the job. The lead time typically runs from the day you approve the proof, not from the first enquiry, and is typically a few weeks. Survey visits, artwork changes and any consent application sit before that point, so getting photos, sizes and logo files to us early typically shortens the overall timescale.

Why is there a price range for fascia signs rather than one figure?

Because jobs vary. The guide of £495 to £1,650 per sign + VAT spans small, simple work at one end and larger, more involved work at the other. Size, material, finish, access, design time and any consent drawings push the figure up or down. A survey or artwork check lets us fix the price for your job in Glasgow.

Will someone visit my premises in Glasgow before quoting?

If the job needs it, yes. For signs fixed to a building, anything illuminated or work at height, we arrange a survey to measure, check the wall and plan access. For window graphics, lettering and many vehicle jobs, clear photos with measurements are often enough, and we only visit if something needs a closer look.

Can you design the sign if I only have a logo?

Yes. Send whatever you have, even a photo of an old sign or a business card, and we lay out the name, logo and contact details on a scale drawing of your frontage. Vector files give the sharpest result; a low-resolution logo can be redrawn.

Printed or vinyl lettering: which should I choose?

Choose cut vinyl for solid-colour text and simple logos, and a laminated print for gradients, photos or many colours. Vinyl looks crisp, and one line, such as a phone number, can be changed later; a print is replaced as a whole if anything changes.

Free quote · scale proof · fixed price

Ready to be seen?

Send a photo of your frontage or vehicle and a rough size. We’ll come back with ideas, a guide price and the next step.

Call WhatsApp Free quote