A fascia sign is the flat panel fixed along the board above a shop or office frontage, usually 3–4 mm aluminium composite carrying printed or cut-vinyl lettering, a logo and sometimes contact details.
Practical reasons to consider fascia signs in Chelmsford
- For a Chelmsford unit in a conservation area, a matt panel with restrained lettering is often the easier design to agree.
- Where footfall on a Chelmsford high street is heavy, a clean, high-contrast fascia is often read before passers-by notice the window display.
- Taking over an older unit in Chelmsford? A new panel can usually go straight over the existing fascia board, without stripping it out.
What fascia signs cost in Chelmsford
The table shows guide prices for fascia signs, starting from £495 and reaching about £1,650 per sign. All figures exclude VAT. Your own price is confirmed after we have seen the site or the artwork, so treat these as a starting point.
| Item | Guide, ex VAT | Inc. VAT (20%) |
|---|---|---|
| Aluminium composite fascia, up to 3 m | £495 – £950 | £594 – £1,140 |
| Aluminium composite fascia, 3–5 m | £750 – £1,650 | £900 – £1,980 |
| Remove and dispose of an old sign | £95 – £250 | £114 – £300 |
| Scaffold tower or access platform, per day (if needed) | £150 – £450 | £180 – £540 |
Guide prices, supplied and fitted and excluding VAT, are £495 to £950 for an aluminium composite fascia up to 3 m and £750 to £1,650 for 3–5 m. Full-colour prints and colour-matched trims sit toward the top of each range.
Options for your Chelmsford project
Panel with edge trim
An aluminium trim frames the panel and hides the fixings.
Panel with trough lighting
A flat panel lit by LED trough lights or spotlights after dark.
Re-skin of an old sign
A new face fixed over a sound existing sign frame.
Do you need permission for a sign in Chelmsford?
In England, a non-illuminated sign on your own business premises usually falls under deemed consent, which means no application is needed provided the sign stays within set limits. The lettering and symbols should be no more than 0.75 m tall (0.3 m in an area of special control), and the top of the sign should sit no higher than the bottom of any first-floor window. Conservation areas and listed buildings need more care: a sign on a listed building usually also needs listed building consent. We check the position for your premises before you commit, and we can prepare the drawings and photos for an application or submit it for you.
Covering Chelmsford and Essex
Our service reaches Chelmsford and all of Essex. The first step depends on the job: a site visit for signs that need measuring, fixing or wiring, or a photo-based quote for graphics and lettering where pictures and sizes tell us enough. Around Chelmsford, that covers postcode districts such as CM1 and CM2. Roughly 17 miles separate Chelmsford from Southend-on-Sea, which lies to the south-east.
Also within reach of Chelmsford
- Fascia signs in Billericay 8 mi
- Fascia signs in Witham 8 mi
- Fascia signs in Maldon 9 mi
- Fascia signs in Wickford 9 mi
- Fascia signs in Braintree 10 mi
Tell us what you have in mind for fascia signs in Chelmsford. Snap the frontage, window or vehicle, add approximate sizes and send it over. Your quote is free, and the proof always comes before any making.