What makes fascia signs more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Brighton is £495–£1,650 per sign + VAT, confirmed after a survey or artwork check.

Do I need to be there when the sign is fitted?

Not usually, as long as the frontage is accessible and power to any old sign lighting can be isolated. We agree the date with you, cone off and manage the pavement area while working, fit around your opening hours where access allows, and send photos once it is up.

Will a fascia sign cope with bad weather?

It should, if it is fixed properly. Aluminium composite does not rot or swell, and stainless fixings avoid the rust streaks that ordinary screws can leave. On older frontages the weak point is usually the board behind, so we check the top edge for water getting in and seal it.

What is the typical timescale for fascia signs from enquiry to fitting?

A quote typically follows once we have your photos or have surveyed the site, and making and fitting is typically booked a few weeks after you approve the proof. Where advertisement consent applies, that decision has to come through before anything goes up, which can add several weeks. We give you an expected timescale with your quote for Brighton.

Can you handle fascia signs for a business in Brighton?

Yes. Smart Signs covers Brighton and the rest of East Sussex as part of a UK-wide service. You send photos and rough sizes, we arrange a survey if the job needs one, then you receive a proof to scale and a fixed written price. Nothing is made or fitted until you have approved both.

Can a sign go above a roller shutter box?

Yes. Shutter boxes often sit just under or across the fascia, so we measure around them at survey. The panel can sit above the box, or cover it with a removable section so the shutter can still be serviced. Tell us if the motor needs access.

Fascia signs in Brighton

A fascia sign is the flat panel fixed along the board above a shop or office frontage, usually 3–4 mm aluminium composite carrying printed or cut-vinyl lettering, a logo and sometimes contact details.

Where fascia signs can pay off in Brighton

Where footfall on a Brighton high street is heavy, a clean, high-contrast fascia is often read before passers-by notice the window display.
If your Brighton shop is one of a parade, a well-proportioned panel can stand out without breaking the shared fascia line.
Taking over an older unit in Brighton? A new panel can usually go straight over the existing fascia board, without stripping it out.

What fascia signs cost in Brighton

Guide prices start from £495 and go up to £1,650 per sign, exclusive of VAT. The breakdown below shows where different sizes and options sit. Nothing is final until we have measured up or checked your artwork and sent a written quote.

Fascia signs in Brighton: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Aluminium composite fascia, up to 3 m	£495 – £950	£594 – £1,140
Aluminium composite fascia, 3–5 m	£750 – £1,650	£900 – £1,980
Remove and dispose of an old sign	£95 – £250	£114 – £300
Scaffold tower or access platform, per day (if needed)	£150 – £450	£180 – £540

Guide prices, supplied and fitted and excluding VAT, are £495 to £950 for an aluminium composite fascia up to 3 m and £750 to £1,650 for 3–5 m. Full-colour prints and colour-matched trims sit toward the top of each range.

Options for your Brighton project

Mineral-core panel

Specified where a landlord or building control asks for one.

Panel with edge trim

An aluminium trim frames the panel and hides the fixings.

Re-skin of an old sign

A new face fixed over a sound existing sign frame.

Do you need permission for a sign in Brighton?

Advertisement consent in England comes from the Town and Country Planning (Control of Advertisements) (England) Regulations 2007. A sign is either excluded from control, has deemed consent, or needs express consent from the council's planning department. For a plain, unlit sign on your own premises, deemed consent usually applies when characters are 0.75 m tall or less (0.3 m in an area of special control) and the top edge is below the first-floor windows. Conservation areas need more care, and a listed building usually needs listed building consent as well; working without it can be a criminal offence. We confirm the route before you commit, and can prepare the drawings for an application or submit it for you.

Covering Brighton and East Sussex

Coverage is nationwide, which means Brighton and the surrounding parts of East Sussex are included as standard. Anything fixed to a building normally needs someone on site to measure and check fixings and access; simpler graphics can usually be quoted from images you send. Addresses in BN1, BN2 and BN3 are all within our Brighton coverage.

Other towns near Brighton

Start with a free quote: a handful of photos plus approximate widths and heights is enough for fascia signs in Brighton. You check and approve the proof, and only then is anything made.

More signs in Brighton

All sign types in Brighton · Fascia signs across East Sussex

Consent	Non-lit signs often have deemed consent in England; listed buildings usually need more
Typical lifespan	Panel lasts many years; vinyl faces typically need renewing first
Typical lead time	typically made and fitted 2–3 weeks after you approve the proof