A fascia sign is the flat panel fixed along the board above a shop or office frontage, usually 3–4 mm aluminium composite carrying printed or cut-vinyl lettering, a logo and sometimes contact details.
The case for fascia signs in Consett
- Rebranding a Consett business is simpler with a flat panel, because vinyl lettering can be updated without replacing the whole sign.
- Retail park landlords often want drawings before approving signs, and a scale visual of your Consett fascia gives them exactly that.
- For a Consett unit in a conservation area, a matt panel with restrained lettering is often the easier design to agree.
What fascia signs cost in Consett
Guide prices start from £495 and go up to £1,650 per sign, exclusive of VAT. The breakdown below shows where different sizes and options sit. Nothing is final until we have measured up or checked your artwork and sent a written quote.
| Item | Guide, ex VAT | Inc. VAT (20%) |
|---|---|---|
| Aluminium composite fascia, up to 3 m | £495 – £950 | £594 – £1,140 |
| Aluminium composite fascia, 3–5 m | £750 – £1,650 | £900 – £1,980 |
| Remove and dispose of an old sign | £95 – £250 | £114 – £300 |
| Scaffold tower or access platform, per day (if needed) | £150 – £450 | £180 – £540 |
Guide prices, supplied and fitted and excluding VAT, are £495 to £950 for an aluminium composite fascia up to 3 m and £750 to £1,650 for 3–5 m. Full-colour prints and colour-matched trims sit toward the top of each range.
Options for your Consett project
Mineral-core panel
Specified where a landlord or building control asks for one.
Panel with edge trim
An aluminium trim frames the panel and hides the fixings.
Panel with trough lighting
A flat panel lit by LED trough lights or spotlights after dark.
Do you need permission for a sign in Consett?
In England, a non-illuminated sign on your own business premises usually falls under deemed consent, which means no application is needed provided the sign stays within set limits. The lettering and symbols should be no more than 0.75 m tall (0.3 m in an area of special control), and the top of the sign should sit no higher than the bottom of any first-floor window. Conservation areas and listed buildings need more care: a sign on a listed building usually also needs listed building consent. We check the position for your premises before you commit, and we can prepare the drawings and photos for an application or submit it for you.
Covering Consett and County Durham
We cover Consett and every other part of County Durham as part of a UK-wide service. Where a survey is needed, we arrange a visit to measure and photograph the site; for many graphics and vehicle jobs, clear photos and measurements are enough to quote from. Around Consett, that covers postcode districts such as DH8. Roughly 25 miles separate Consett from Darlington, which lies to the south-east.
Neighbouring towns
- Fascia signs in Stanley 5 mi
- Fascia signs in Newburn 10 mi
- Fascia signs in Chester-le-Street 10 mi
- Fascia signs in Durham 12 mi
- Fascia signs in Gateshead 12 mi
Photos, sizes and your logo are all we need to start. Send them over for a free, no-obligation quote on fascia signs in Consett; you approve a scaled drawing before a single thing is made.
More signs in Consett
- Window graphics in Consett
- Fleet livery in Consett
- Sign lighting and LED upgrades in Consett
- Car wraps and colour change in Consett
- LED neon signs in Consett
- One-way vision film in Consett
- Halo-lit letters in Consett
- Illuminated built-up letters in Consett
All sign types in Consett · Fascia signs across County Durham