Chapter 8 chevron kits in Lancing

As a guide, £325–£895 per vehicle + VAT. Where your job falls in that range depends on size, materials, access height, whether old signage has to come off and how much design work is involved. We confirm a fixed price after a survey or artwork check, before anything is ordered.

Wash them as part of the normal vehicle wash, using vehicle shampoo and a soft brush or mitt. Road film and mud cut down how much light the chevrons reflect, so keeping them clean matters more than it does for ordinary graphics. Avoid solvents and scrapers, and keep pressure-washer lances back from edges and cut-outs.

It depends on the grade of retroreflective film, how much sun and road grime the vehicle sees, and how it's cleaned. Manufacturer ratings vary between grades, so check the data for the film your contract specifies. Inspect the markings regularly, because faded, cracked or peeling chevrons reflect less and may not pass a client's vehicle check.

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

A rear chevron kit is typically fitted in 1–3 hours per vehicle, depending on size and the number of cut-outs. Fitting can usually happen at your depot or yard if there's dry, covered space, so several vehicles can be done in one visit. The doors need to be clean and dry before fitting starts.

It can. Not every job needs an application, but where express consent is required the council's decision typically takes several weeks, and fitting typically waits until it is granted. We check this at the start, so the timetable you receive with your quote allows for consent where it applies, along with the proof approval stage.