Smart Signs logo

Chapter 8 chevron kits · Gateshead

Chapter 8 chevron kits in Gateshead

Getting Chapter 8 chevron kits right comes down to accurate measuring, materials that suit the surface and a check of the rules before anything is ordered. That is how Smart Signs approaches every job in Gateshead and elsewhere in the UK: survey or photos first, then a scaled proof and a written quote, then making and fitting once you are happy.

From £325 per vehicle + VAT · UK guide price
Rear doors of a white utility van fitted with red and yellow retroreflective chevrons at a roadworks site

Chapter 8 chevrons are rear markings of alternating red and fluorescent yellow retroreflective material, with the chevrons pointing upwards, fitted to vehicles that stop or work on the highway under the Traffic Signs Manual's Chapter 8 guidance.

What you gain from Chapter 8 chevron kits in Gateshead

  • If you're tendering for maintenance work with councils or utilities across Tyne and Wear, check whether contracts covering Gateshead specify rear chevrons, and to what standard.
  • Delivery, recovery and refuse vehicles that stop briefly on busy Gateshead streets can carry rear chevrons too, where their contracts ask for them.
  • Utility and highway contractors working on roads in and around Gateshead are often asked for Chapter 8 rear markings before their vehicles are allowed on site.

What Chapter 8 chevron kits cost in Gateshead

Below is the guide pricing we use for Chapter 8 chevron kits: from £325 up to £895 per vehicle, before VAT. These are not fixed quotes. A written price follows once measurements are taken and your artwork has been checked.

Chapter 8 chevron kits in Gateshead: guide prices, supplied and fitted
ItemGuide, ex VATInc. VAT (20%)
Car-derived or small van£325 – £495£390 – £594
Medium or large van£395 – £695£474 – £834
Truck or tipper rear£595 – £895£714 – £1,074

Price depends on the area to be covered, how many cut-outs are needed around handles, lights and cameras, the grade of retroreflective film your contract specifies, whether old markings must come off, and how many vehicles are done in one visit. All figures are guides excluding VAT, confirmed when we have photos and your contract spec.

Options for your Gateshead project

Truck or tipper rear kit

Chevrons on tailgates, rear frames or box bodies, shaped around fittings.

Side and contour markings

Extra markings for larger vehicles, fitted alongside the rear kit.

Permanent self-adhesive kit

Bonded directly to the doors; the usual choice for working fleets.

Chapter 8 chevron kits in Gateshead: permission and rules

Rear chevrons aren't usually an advertisement matter, so council consent doesn't come into it. What matters instead is Chapter 8 of the Traffic Signs Manual, the guidance for vehicles that stop or work on the highway, together with the specification in your contract. Highway authorities, utilities and main contractors often add their own requirements, so send us the exact wording before we cut anything. Markings are kept off windows and away from lights, reflectors and the number plate, which must stay clearly visible. Chevrons don't change a vehicle's main colour, so the V5C isn't affected. Whether you work in England, Wales, Scotland or Northern Ireland, treat your contract's spec as the standard and confirm it with your client.

Covering Gateshead and Tyne and Wear

You do not need to be in a particular postcode for us to help: Gateshead and the whole of Tyne and Wear are covered. If your job needs a survey, we arrange the visit. If it can be priced from photos, sizes and the vehicle make and model, we do it that way instead. Addresses in NE8, NE1, NE2 and NE6 are all within our Gateshead coverage.

Neighbouring towns

Start with a free quote: a handful of photos plus approximate widths and heights is enough for Chapter 8 chevron kits in Gateshead. You check and approve the proof, and only then is anything made.

More signs in Gateshead

All sign types in Gateshead · Chapter 8 chevron kits across Tyne and Wear

Chapter 8 chevron kits in Gateshead: questions

Can I get a fixed price for Chapter 8 chevron kits in Gateshead before committing?

Yes. We start from the guide range, £325 to £895 per vehicle excluding VAT, then measure up or look at your photos and artwork. That gives a fixed written price reflecting the real size, materials, access and any design or consent work. You only commit once you accept that price and approve the proof.

Does every van legally need Chapter 8 chevrons?

No single answer fits every van. Chapter 8 is guidance for vehicles that stop or work on the highway, and whether your vehicles need rear chevrons depends on the work you do and who you do it for. Clients and contracts often require them, sometimes with extra detail of their own, so check your contract's exact wording and ask your client if it's unclear.

Is Gateshead inside your coverage area for Chapter 8 chevron kits?

It is. We work throughout the UK rather than in a single region, so Gateshead and every part of Tyne and Wear are included. Where a survey is needed we arrange a visit; for graphics jobs we can often quote from photos and measurements. Either way, you get a proof and a written price first.

What can delay Chapter 8 chevron kits in Gateshead?

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.

Can you fit chevrons to tippers and trucks?

Yes. Truck and tipper kits are cut to the tailgate, rear frame or box body, around lights, hinges, catches and the number plate. Tipper tailgates take a lot of knocks, so edges are sealed carefully. Guide prices for a truck or tipper rear are from £595 to £895 + VAT, confirmed once we've seen photos and your spec.

Can a damaged section be replaced?

Yes. Because each kit is cut from a record of your vehicle's rear layout, a scuffed or torn section can be cut again and fitted without redoing the whole door. If the rest of the kit has aged, a new section may look brighter, so replacing all the chevrons on that door can give a more even appearance.

Free quote · scale proof · fixed price

Ready to be seen?

Send a photo of your frontage or vehicle and a rough size. We’ll come back with ideas, a guide price and the next step.

Call WhatsApp Free quote