Do you work across Kent or only in Rochester?

Across all of Kent, and the rest of the UK too. Rochester is simply one of the places we list, and enquiries from anywhere nearby follow exactly the same steps: photos or a survey, a scaled proof, a written price, then making and fitting once you sign off the design.

Can chevrons go over an existing wrap or lettering?

Chevrons can be applied over a sound, well-bonded wrap, though fitting them directly to the paint gives a more predictable result. Lettering on the rear doors usually has to move up or come off to make room. If you're planning new livery, leave space for the chevrons on the rear doors at the design stage.

How should chevrons be cleaned?

Wash them as part of the normal vehicle wash, using vehicle shampoo and a soft brush or mitt. Road film and mud cut down how much light the chevrons reflect, so keeping them clean matters more than it does for ordinary graphics. Avoid solvents and scrapers, and keep pressure-washer lances back from edges and cut-outs.

Does every van legally need Chapter 8 chevrons?

No single answer fits every van. Chapter 8 is guidance for vehicles that stop or work on the highway, and whether your vehicles need rear chevrons depends on the work you do and who you do it for. Clients and contracts often require them, sometimes with extra detail of their own, so check your contract's exact wording and ask your client if it's unclear.

How soon after I approve the proof can the work on Chapter 8 chevron kits happen?

Typically within a few weeks, depending on what has to be made. Printed and cut graphics are typically produced sooner than fabricated letters, trays or illuminated signs, which need more fabrication time. If the job needs advertisement consent, fitting waits for the council's decision. We confirm an expected date for Rochester once materials are ordered.

What makes Chapter 8 chevron kits more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Rochester is £325–£895 per vehicle + VAT, confirmed after a survey or artwork check.

Chapter 8 chevron kits in Rochester

Chapter 8 chevrons are rear markings of alternating red and fluorescent yellow retroreflective material, with the chevrons pointing upwards, fitted to vehicles that stop or work on the highway under the Traffic Signs Manual's Chapter 8 guidance.

Where Chapter 8 chevron kits can pay off in Rochester

A depot in Rochester with several works vans can have kits fitted in one visit, rather than sending vehicles away one at a time.
Main contractors in Rochester may ask subcontractors to show their vehicle markings at site induction, so a properly cut kit helps avoid delays on the first day.
If you're tendering for maintenance work with councils or utilities across Kent, check whether contracts covering Rochester specify rear chevrons, and to what standard.

What Chapter 8 chevron kits cost in Rochester

Prices below are guides, not quotes: £325 to £895 per vehicle plus VAT, depending on size, materials and access. We confirm the exact figure after a survey or an artwork check, and it is agreed before anything is made.

Chapter 8 chevron kits in Rochester: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Car-derived or small van	£325 – £495	£390 – £594
Medium or large van	£395 – £695	£474 – £834
Truck or tipper rear	£595 – £895	£714 – £1,074

Guide prices for a fitted Chapter 8 chevron kit run from £325 to £495 + VAT for a car-derived or small van, £395 to £695 + VAT for a medium or large van, and £595 to £895 + VAT for a truck or tipper rear.

Options for your Rochester project

Side and contour markings

Extra markings for larger vehicles, fitted alongside the rear kit.

Medium or large van kit

Full rear-door coverage cut around handles, lights, hinges and the plate.

Truck or tipper rear kit

Chevrons on tailgates, rear frames or box bodies, shaped around fittings.

Chapter 8 chevron kits in Rochester: permission and rules

Rear chevrons aren't usually an advertisement matter, so council consent doesn't come into it. What matters instead is Chapter 8 of the Traffic Signs Manual, the guidance for vehicles that stop or work on the highway, together with the specification in your contract. Highway authorities, utilities and main contractors often add their own requirements, so send us the exact wording before we cut anything. Markings are kept off windows and away from lights, reflectors and the number plate, which must stay clearly visible. Chevrons don't change a vehicle's main colour, so the V5C isn't affected. Whether you work in England, Wales, Scotland or Northern Ireland, treat your contract's spec as the standard and confirm it with your client.

Covering Rochester and Kent

Coverage is nationwide, which means Rochester and the surrounding parts of Kent are included as standard. Anything fixed to a building normally needs someone on site to measure and check fixings and access; simpler graphics can usually be quoted from images you send. Addresses in ME2, ME4, ME1 and ME7 are all within our Rochester coverage. Roughly 8.4 miles separate Rochester from Maidstone, which lies to the south.

Also within reach of Rochester

Want a firm figure? Use the quote form to send images and dimensions of the site or vehicle. We will price Chapter 8 chevron kits at no charge and send a proof for your approval before production begins.

More signs in Rochester

All sign types in Rochester · Chapter 8 chevron kits across Kent

Consent	Not an advertisement matter; follow Chapter 8 and your contract's exact spec
Materials	Red and fluorescent yellow retroreflective film, chevrons pointing upwards
Fixing / installation	Permanent self-adhesive preferred; magnetic panels only where your contract accepts them