Chapter 8 chevron kits in Winchester

Typically within a few weeks, depending on what has to be made. Printed and cut graphics are typically produced sooner than fabricated letters, trays or illuminated signs, which need more fabrication time. If the job needs advertisement consent, fitting waits for the council's decision. We confirm an expected date for Winchester once materials are ordered.

A rear chevron kit is typically fitted in 1–3 hours per vehicle, depending on size and the number of cut-outs. Fitting can usually happen at your depot or yard if there's dry, covered space, so several vehicles can be done in one visit. The doors need to be clean and dry before fitting starts.

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

Yes. Because each kit is cut from a record of your vehicle's rear layout, a scuffed or torn section can be cut again and fitted without redoing the whole door. If the rest of the kit has aged, a new section may look brighter, so replacing all the chevrons on that door can give a more even appearance.

Chevrons can be applied over a sound, well-bonded wrap, though fitting them directly to the paint gives a more predictable result. Lettering on the rear doors usually has to move up or come off to make room. If you're planning new livery, leave space for the chevrons on the rear doors at the design stage.

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Winchester is £325–£895 per vehicle + VAT, confirmed after a survey or artwork check.