Chapter 8 chevron kits in Radcliffe

A rear chevron kit is typically fitted in 1–3 hours per vehicle, depending on size and the number of cut-outs. Fitting can usually happen at your depot or yard if there's dry, covered space, so several vehicles can be done in one visit. The doors need to be clean and dry before fitting starts.

No. Our guide range of £325–£895 per vehicle excludes VAT, which is added to the quote. The final figure depends on size, materials, access, removal of existing signage or graphics and the artwork needed, and we confirm it in writing after a survey or once we have checked your files.

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

It depends on the grade of retroreflective film, how much sun and road grime the vehicle sees, and how it's cleaned. Manufacturer ratings vary between grades, so check the data for the film your contract specifies. Inspect the markings regularly, because faded, cracked or peeling chevrons reflect less and may not pass a client's vehicle check.

Chevrons can be applied over a sound, well-bonded wrap, though fitting them directly to the paint gives a more predictable result. Lettering on the rear doors usually has to move up or come off to make room. If you're planning new livery, leave space for the chevrons on the rear doors at the design stage.

A quote typically follows once we have your photos or have surveyed the site, and making and fitting is typically booked a few weeks after you approve the proof. Where advertisement consent applies, that decision has to come through before anything goes up, which can add several weeks. We give you an expected timescale with your quote for Radcliffe.