Smart Signs logo

Chapter 8 chevron kits · Cheltenham

Chapter 8 chevron kits in Cheltenham

Your enquiry about Chapter 8 chevron kits in Cheltenham goes to one team that handles everything: measuring, artwork, the consent check, the proof, the price and the arrangements for making and fitting. We work right across the UK rather than from a single patch, which is why the process described on this page is the same in Cheltenham as it is throughout Gloucestershire.

From £325 per vehicle + VAT · UK guide price
Rear doors of a white utility van fitted with red and yellow retroreflective chevrons at a roadworks site

Chapter 8 chevrons are rear markings of alternating red and fluorescent yellow retroreflective material, with the chevrons pointing upwards, fitted to vehicles that stop or work on the highway under the Traffic Signs Manual's Chapter 8 guidance.

Where Chapter 8 chevron kits can pay off in Cheltenham

  • Delivery, recovery and refuse vehicles that stop briefly on busy Cheltenham streets can carry rear chevrons too, where their contracts ask for them.
  • Vans that stop at kerbsides in Cheltenham to repair, survey or unload are easier for approaching drivers to pick out with high-visibility rear chevrons.
  • Utility and highway contractors working on roads in and around Cheltenham are often asked for Chapter 8 rear markings before their vehicles are allowed on site.

What Chapter 8 chevron kits cost in Cheltenham

Guide prices start from £325 and go up to £895 per vehicle, exclusive of VAT. The breakdown below shows where different sizes and options sit. Nothing is final until we have measured up or checked your artwork and sent a written quote.

Chapter 8 chevron kits in Cheltenham: guide prices, supplied and fitted
ItemGuide, ex VATInc. VAT (20%)
Car-derived or small van£325 – £495£390 – £594
Medium or large van£395 – £695£474 – £834
Truck or tipper rear£595 – £895£714 – £1,074

Price depends on the area to be covered, how many cut-outs are needed around handles, lights and cameras, the grade of retroreflective film your contract specifies, whether old markings must come off, and how many vehicles are done in one visit. All figures are guides excluding VAT, confirmed when we have photos and your contract spec.

Options for your Cheltenham project

Car-derived or small van kit

Chevrons cut to the rear doors or tailgate of a small van.

Truck or tipper rear kit

Chevrons on tailgates, rear frames or box bodies, shaped around fittings.

Side and contour markings

Extra markings for larger vehicles, fitted alongside the rear kit.

Chapter 8 chevron kits in Cheltenham: permission and rules

Rear chevrons aren't usually an advertisement matter, so council consent doesn't come into it. What matters instead is Chapter 8 of the Traffic Signs Manual, the guidance for vehicles that stop or work on the highway, together with the specification in your contract. Highway authorities, utilities and main contractors often add their own requirements, so send us the exact wording before we cut anything. Markings are kept off windows and away from lights, reflectors and the number plate, which must stay clearly visible. Chevrons don't change a vehicle's main colour, so the V5C isn't affected. Whether you work in England, Wales, Scotland or Northern Ireland, treat your contract's spec as the standard and confirm it with your client.

Covering Cheltenham and Gloucestershire

We take on work in Cheltenham, across Gloucestershire and throughout the UK. When a survey makes sense, typically for anything fixed at height or illuminated, we arrange a visit. Graphics are often priced from pictures and dimensions, with a survey added only if the photos leave questions. Addresses in GL50, GL51, GL53 and GL52 are all within our Cheltenham coverage. Cheltenham is about 7.4 miles east of Gloucester.

Neighbouring towns

Tell us what you have in mind for Chapter 8 chevron kits in Cheltenham. Snap the frontage, window or vehicle, add approximate sizes and send it over. Your quote is free, and the proof always comes before any making.

More signs in Cheltenham

All sign types in Cheltenham · Chapter 8 chevron kits across Gloucestershire

Chapter 8 chevron kits in Cheltenham: questions

What makes Chapter 8 chevron kits more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Cheltenham is £325–£895 per vehicle + VAT, confirmed after a survey or artwork check.

How long does it take to get Chapter 8 chevron kits in Cheltenham?

It typically takes a few weeks from first enquiry, with much of that time falling after you approve the proof, while the work is made and scheduled. Graphics and vehicle jobs are typically shorter than fabricated or illuminated signs. If advertisement consent is needed, the council's decision comes first and adds to the overall timescale.

Is Cheltenham inside your coverage area for Chapter 8 chevron kits?

It is. We work throughout the UK rather than in a single region, so Cheltenham and every part of Gloucestershire are included. Where a survey is needed we arrange a visit; for graphics jobs we can often quote from photos and measurements. Either way, you get a proof and a written price first.

How long do chevron kits last?

It depends on the grade of retroreflective film, how much sun and road grime the vehicle sees, and how it's cleaned. Manufacturer ratings vary between grades, so check the data for the film your contract specifies. Inspect the markings regularly, because faded, cracked or peeling chevrons reflect less and may not pass a client's vehicle check.

Can chevrons go over an existing wrap or lettering?

Chevrons can be applied over a sound, well-bonded wrap, though fitting them directly to the paint gives a more predictable result. Lettering on the rear doors usually has to move up or come off to make room. If you're planning new livery, leave space for the chevrons on the rear doors at the design stage.

How long does fitting take, and where?

A rear chevron kit is typically fitted in 1–3 hours per vehicle, depending on size and the number of cut-outs. Fitting can usually happen at your depot or yard if there's dry, covered space, so several vehicles can be done in one visit. The doors need to be clean and dry before fitting starts.

Free quote · scale proof · fixed price

Ready to be seen?

Send a photo of your frontage or vehicle and a rough size. We’ll come back with ideas, a guide price and the next step.

Call WhatsApp Free quote