Chapter 8 chevron kits in Great Sankey

As a guide, £325–£895 per vehicle + VAT. Where your job falls in that range depends on size, materials, access height, whether old signage has to come off and how much design work is involved. We confirm a fixed price after a survey or artwork check, before anything is ordered.

Chevrons can be applied over a sound, well-bonded wrap, though fitting them directly to the paint gives a more predictable result. Lettering on the rear doors usually has to move up or come off to make room. If you're planning new livery, leave space for the chevrons on the rear doors at the design stage.

Wash them as part of the normal vehicle wash, using vehicle shampoo and a soft brush or mitt. Road film and mud cut down how much light the chevrons reflect, so keeping them clean matters more than it does for ordinary graphics. Avoid solvents and scrapers, and keep pressure-washer lances back from edges and cut-outs.

If the job needs it, yes. For signs fixed to a building, anything illuminated or work at height, we arrange a survey to measure, check the wall and plan access. For window graphics, lettering and many vehicle jobs, clear photos with measurements are often enough, and we only visit if something needs a closer look.

It typically takes a few weeks from first enquiry, with much of that time falling after you approve the proof, while the work is made and scheduled. Graphics and vehicle jobs are typically shorter than fabricated or illuminated signs. If advertisement consent is needed, the council's decision comes first and adds to the overall timescale.

Yes. Because each kit is cut from a record of your vehicle's rear layout, a scuffed or torn section can be cut again and fitted without redoing the whole door. If the rest of the kit has aged, a new section may look brighter, so replacing all the chevrons on that door can give a more even appearance.