Chapter 8 chevron kits in Helensburgh

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

Typically within a few weeks, depending on what has to be made. Printed and cut graphics are typically produced sooner than fabricated letters, trays or illuminated signs, which need more fabrication time. If the job needs advertisement consent, fitting waits for the council's decision. We confirm an expected date for Helensburgh once materials are ordered.

Wash them as part of the normal vehicle wash, using vehicle shampoo and a soft brush or mitt. Road film and mud cut down how much light the chevrons reflect, so keeping them clean matters more than it does for ordinary graphics. Avoid solvents and scrapers, and keep pressure-washer lances back from edges and cut-outs.

Guide pricing runs from £325 to £895 per vehicle, plus VAT. The main things that move it are dimensions, the material and finish, illumination where relevant, how high the work is and whether a scaffold or platform is needed. Your written quote, issued after a survey or a check of your artwork, replaces the guide figure.

Chevrons can be applied over a sound, well-bonded wrap, though fitting them directly to the paint gives a more predictable result. Lettering on the rear doors usually has to move up or come off to make room. If you're planning new livery, leave space for the chevrons on the rear doors at the design stage.

Yes. Because each kit is cut from a record of your vehicle's rear layout, a scuffed or torn section can be cut again and fitted without redoing the whole door. If the rest of the kit has aged, a new section may look brighter, so replacing all the chevrons on that door can give a more even appearance.