Can built-up letters go on cladding?

Yes, in most cases. Metal and composite cladding needs a fixing that suits the panel system, such as rivnuts, through-bolts to a backing rail, or a mounting rail behind the letters. We ask the building owner about the cladding before drilling, because some systems restrict penetrations.

What is the difference between built-up and flat-cut letters?

Built-up letters are hollow, fabricated with separate faces and returns, so they can be 50–100 mm deep or more. Flat-cut letters are cut from one solid sheet, usually 5–10 mm thick. Built-up letters have more presence and share their construction with illuminated letters; flat-cut letters cost less.

What can delay built-up 3D letters in Worthing?

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.

How do I keep metal letters clean?

Wash them a few times a year with warm water and a mild detergent, then rinse and dry, wiping brushed stainless along the grain. Avoid abrasive pads and bleach-based cleaners, which scratch or mark finishes. Mirror stainless and brass show marks fastest, so they suit positions out of reach.

Do you cover smaller places near Worthing as well?

Yes. Our coverage is not limited to Worthing itself: nearby towns, industrial estates and business parks across West Sussex are included too. The process does not change with the postcode. Send photos and approximate sizes, and we will tell you whether a site visit is needed before we can give you a fixed price.

What makes built-up 3D letters more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Worthing is £55–£165 per letter + VAT, confirmed after a survey or artwork check.

Built-up 3D letters in Worthing

Built-up letters are three-dimensional letters fabricated, usually from metal sheet, with a face and returns joined into a hollow letter typically 50–100 mm deep, then fixed to a wall or sign on locators.

Points in favour of built-up 3D letters in Worthing

A Worthing restaurant with a handsome stone or brick front can skip a fascia panel and let fabricated letters sit directly on the masonry.
Gyms, studios and trade units in Worthing can use painted aluminium letters on profiled cladding for a durable name above the roller door.
Hotels and venues in Worthing wanting a lasting first impression may choose brass-finish letters, which suit traditional and modern buildings.

What built-up 3D letters cost in Worthing

Guide prices for built-up 3D letters run from £55 to £165 per letter, excluding VAT. The table below breaks that down; your actual price is fixed in writing once we have surveyed the site or checked the artwork.

Built-up 3D letters in Worthing: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Fabricated letter, 300 mm tall	£55 – £165	£66 – £198
Typical business name (10–14 letters)	£850 – £2,600	£1,020 – £3,120
Logo or symbol, made to the same depth	£150 – £650	£180 – £780

The metal drives cost first: painted aluminium sits at the lower end, mirror stainless and brass finishes at the top. Letter height, return depth, letter count, stand-off locators, access height and the wall surface follow. Every price is confirmed after survey and an artwork check.

Options for your Worthing project

Brushed 304 stainless

Satin-grain stainless for most inland locations, classic and understated.

Painted aluminium

Lightweight letters painted or powder coated to any RAL colour.

Contrast returns

Faces in one finish and sides in another, such as brushed with black.

Do you need permission for a sign in Worthing?

Will you need permission? For a non-illuminated sign at your own business address in England, usually not, as long as it stays inside the deemed consent limits: letters no taller than 0.75 m (0.3 m in an area of special control) and nothing above the bottom of a first-floor window. Historic streets need more care. In a conservation area the details matter more, and fixing to a listed building usually needs listed building consent, with fixings into mortar joints rather than brick or stone faces generally preferred. We check with you before anything is ordered, and can prepare drawings and photos for an application, or submit it for you.

Covering Worthing and West Sussex

Coverage is nationwide, which means Worthing and the surrounding parts of West Sussex are included as standard. Anything fixed to a building normally needs someone on site to measure and check fixings and access; simpler graphics can usually be quoted from images you send. Around Worthing, that covers postcode districts such as BN11, BN14, BN13 and BN15. From Crawley, Worthing is roughly 22 miles to the south.

Other towns near Worthing

Built-up 3D letters in Lancing 2 mi
Built-up 3D letters in Shoreham-by-Sea 5 mi
Built-up 3D letters in Portslade 7 mi
Built-up 3D letters in Littlehampton 7 mi
Built-up 3D letters in Hove 9 mi

Free quotes for built-up 3D letters start with your pictures. Measure roughly, take a few shots from the street or around the vehicle, and send them to us. We prepare a proof for you to approve before anything is produced.

More signs in Worthing

All sign types in Worthing · Built-up 3D letters across West Sussex

Fixing / installation	Studs or locators into resin anchors, set out with a full-size paper template
Typical lead time	typically 3–5 weeks after proof approval, depending on metal and finish
Typical size	Letters around 300 mm tall on shopfronts; taller on larger buildings