Do stainless steel letters rust?

Stainless steel resists rust well, but it is not immune. Grade 304 suits most inland sites; near the coast, grade 316 is specified because salt air can cause brown tea staining on 304. Occasional washing with clean water keeps either grade bright.

How do I keep metal letters clean?

Wash them a few times a year with warm water and a mild detergent, then rinse and dry, wiping brushed stainless along the grain. Avoid abrasive pads and bleach-based cleaners, which scratch or mark finishes. Mirror stainless and brass show marks fastest, so they suit positions out of reach.

Is Telford inside your coverage area for built-up 3D letters?

It is. We work throughout the UK rather than in a single region, so Telford and every part of Shropshire are included. Where a survey is needed we arrange a visit; for graphics jobs we can often quote from photos and measurements. Either way, you get a proof and a written price first.

What is the typical timescale for built-up 3D letters from enquiry to fitting?

A quote typically follows once we have your photos or have surveyed the site, and making and fitting is typically booked a few weeks after you approve the proof. Where advertisement consent applies, that decision has to come through before anything goes up, which can add several weeks. We give you an expected timescale with your quote for Telford.

Can built-up letters go on cladding?

Yes, in most cases. Metal and composite cladding needs a fixing that suits the panel system, such as rivnuts, through-bolts to a backing rail, or a mounting rail behind the letters. We ask the building owner about the cladding before drilling, because some systems restrict penetrations.

What is the price of built-up 3D letters for a business in Telford?

Guide pricing runs from £55 to £165 per letter, plus VAT. The main things that move it are dimensions, the material and finish, illumination where relevant, how high the work is and whether a scaffold or platform is needed. Your written quote, issued after a survey or a check of your artwork, replaces the guide figure.

Built-up 3D letters in Telford

Built-up letters are three-dimensional letters fabricated, usually from metal sheet, with a face and returns joined into a hollow letter typically 50–100 mm deep, then fixed to a wall or sign on locators.

Points in favour of built-up 3D letters in Telford

Hotels and venues in Telford wanting a lasting first impression may choose brass-finish letters, which suit traditional and modern buildings.
Gyms, studios and trade units in Telford can use painted aluminium letters on profiled cladding for a durable name above the roller door.
Letters for Telford frontages are usually 304 stainless; where a building faces the sea or a gritted main road, 316 keeps its finish for longer.

What built-up 3D letters cost in Telford

We publish guide prices so you can plan before you get in touch. For built-up 3D letters the range is £55–£165 per letter, not including VAT, and the final price is confirmed after we survey the site or check the artwork.

Built-up 3D letters in Telford: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Fabricated letter, 300 mm tall	£55 – £165	£66 – £198
Typical business name (10–14 letters)	£850 – £2,600	£1,020 – £3,120
Logo or symbol, made to the same depth	£150 – £650	£180 – £780

Non-illuminated letters around 300 mm tall are guided at £55 to £165 per letter, supplied and fitted, excluding VAT. A typical business name of 10–14 letters is guided at £850 to £2,600, and a logo or symbol made to the same depth adds a guide £150 to £650.

Options for your Telford project

Contrast returns

Faces in one finish and sides in another, such as brushed with black.

Mirror-polished stainless

Reflective faces that catch light, but show fingerprints.

Brushed 304 stainless

Satin-grain stainless for most inland locations, classic and understated.

Do you need permission for a sign in Telford?

Advertisement consent in England comes from the Town and Country Planning (Control of Advertisements) (England) Regulations 2007. A sign is either excluded from control, has deemed consent, or needs express consent from the council's planning department. For a plain, unlit sign on your own premises, deemed consent usually applies when characters are 0.75 m tall or less (0.3 m in an area of special control) and the top edge is below the first-floor windows. Conservation areas need more care, and a listed building usually needs listed building consent as well; working without it can be a criminal offence. We confirm the route before you commit, and can prepare the drawings for an application or submit it for you.

Covering Telford and Shropshire

We cover Telford and every other part of Shropshire as part of a UK-wide service. Where a survey is needed, we arrange a visit to measure and photograph the site; for many graphics and vehicle jobs, clear photos and measurements are enough to quote from. Addresses in TF3, TF4, TF2 and TF7 are all within our Telford coverage.

Neighbouring towns

Built-up 3D letters in Wellington 3 mi
Built-up 3D letters in Shrewsbury 13 mi
Built-up 3D letters in Wolverhampton 15 mi
Built-up 3D letters in Wednesfield 16 mi
Built-up 3D letters in Stafford 16 mi

If built-up 3D letters could help your business in Telford, the quote is free. Send pictures and sizes by form, phone or WhatsApp, and you will have a scaled design to approve before any work goes ahead.

More signs in Telford

All sign types in Telford · Built-up 3D letters across Shropshire

Typical lifespan	Many years outdoors; painted finishes may eventually need recoating
Materials	304 or 316 stainless steel, painted aluminium, brass or copper finishes
Consent	Non-lit letters often deemed in England within limits; upper-storey letters usually need express consent