Can non-lit built-up letters be lit later?

Not easily. Illuminated letters need translucent faces or open backs, internal LED modules, drain holes and cable routes designed in from the start. If lighting is a possibility, we can quote halo-lit or face-lit letters now, or plan spotlights for a non-lit set.

Could the consent process affect the timing of my job in Eastleigh?

It can. Not every job needs an application, but where express consent is required the council's decision typically takes several weeks, and fitting typically waits until it is granted. We check this at the start, so the timetable you receive with your quote allows for consent where it applies, along with the proof approval stage.

What is the difference between built-up and flat-cut letters?

Built-up letters are hollow, fabricated with separate faces and returns, so they can be 50–100 mm deep or more. Flat-cut letters are cut from one solid sheet, usually 5–10 mm thick. Built-up letters have more presence and share their construction with illuminated letters; flat-cut letters cost less.

Is Eastleigh inside your coverage area for built-up 3D letters?

It is. We work throughout the UK rather than in a single region, so Eastleigh and every part of Hampshire are included. Where a survey is needed we arrange a visit; for graphics jobs we can often quote from photos and measurements. Either way, you get a proof and a written price first.

How do I keep metal letters clean?

Wash them a few times a year with warm water and a mild detergent, then rinse and dry, wiping brushed stainless along the grain. Avoid abrasive pads and bleach-based cleaners, which scratch or mark finishes. Mirror stainless and brass show marks fastest, so they suit positions out of reach.

Is there a guide price for built-up 3D letters in Eastleigh?

Yes: £55–£165 per letter + VAT is our guide range. It is not a fixed quote, because no two jobs are the same size or on the same surface. The area covered, materials, the number of letters or panels, removal of anything old and access all change the figure, which we confirm after seeing the site or artwork.

Built-up 3D letters in Eastleigh

Built-up letters are three-dimensional letters fabricated, usually from metal sheet, with a face and returns joined into a hollow letter typically 50–100 mm deep, then fixed to a wall or sign on locators.

The case for built-up 3D letters in Eastleigh

Refurbishing a frontage in Eastleigh? Plan letter positions with the architect's drawings so fresh render isn't drilled twice.
Letters for Eastleigh frontages are usually 304 stainless; where a building faces the sea or a gritted main road, 316 keeps its finish for longer.
Hotels and venues in Eastleigh wanting a lasting first impression may choose brass-finish letters, which suit traditional and modern buildings.

What built-up 3D letters cost in Eastleigh

How much? Expect a guide range of £55–£165 per letter, VAT excluded. The rows below show what moves a job up or down that range, and the figure becomes firm once the survey or artwork check is done.

Built-up 3D letters in Eastleigh: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Fabricated letter, 300 mm tall	£55 – £165	£66 – £198
Typical business name (10–14 letters)	£850 – £2,600	£1,020 – £3,120
Logo or symbol, made to the same depth	£150 – £650	£180 – £780

Non-illuminated letters around 300 mm tall are guided at £55 to £165 per letter, supplied and fitted, excluding VAT. A typical business name of 10–14 letters is guided at £850 to £2,600, and a logo or symbol made to the same depth adds a guide £150 to £650.

Options for your Eastleigh project

Brushed 304 stainless

Satin-grain stainless for most inland locations, classic and understated.

Brass or copper finish

Warm metallic faces, lacquered or left to patina.

Contrast returns

Faces in one finish and sides in another, such as brushed with black.

Do you need permission for a sign in Eastleigh?

Advertisement consent in England comes from the Town and Country Planning (Control of Advertisements) (England) Regulations 2007. A sign is either excluded from control, has deemed consent, or needs express consent from the council's planning department. For a plain, unlit sign on your own premises, deemed consent usually applies when characters are 0.75 m tall or less (0.3 m in an area of special control) and the top edge is below the first-floor windows. Conservation areas need more care, and a listed building usually needs listed building consent as well; working without it can be a criminal offence. We confirm the route before you commit, and can prepare the drawings for an application or submit it for you.

Covering Eastleigh and Hampshire

Jobs in Eastleigh are handled the same way as jobs anywhere else in Hampshire: one team, one process. If the work calls for a survey, we book a visit at a time that suits you. If photos and sizes will do, we quote from those and skip the visit altogether. Addresses in SO50, SO53 and SO18 are all within our Eastleigh coverage. Eastleigh is about 4.9 miles north-east of Southampton.

Also within reach of Eastleigh

Ready to price built-up 3D letters in Eastleigh? Send a few photos and rough sizes through the form or WhatsApp. The quote is free, and you will see a proof to scale before anything is made.

More signs in Eastleigh

All sign types in Eastleigh · Built-up 3D letters across Hampshire

Typical lead time	typically 3–5 weeks after proof approval, depending on metal and finish
Fixing / installation	Studs or locators into resin anchors, set out with a full-size paper template
Consent	Non-lit letters often deemed in England within limits; upper-storey letters usually need express consent