Smart Signs logo

Built-up 3D letters · Bangor

Built-up 3D letters in Bangor, County Down

Whether your business in Bangor is opening, rebranding or replacing something tired, built-up 3D letters can be planned properly from the start. We look at the building or vehicle, the viewing distance and the consent position, then put a scaled drawing and a written price in front of you. Smart Signs covers Bangor, the rest of County Down and the wider UK.

From £55 per letter + VAT · UK guide price
Brushed stainless steel 3D letters 'HARBOUR & CO' on a rendered wall beside a glass office entrance.

Built-up letters are three-dimensional letters fabricated, usually from metal sheet, with a face and returns joined into a hollow letter typically 50–100 mm deep, then fixed to a wall or sign on locators.

Points in favour of built-up 3D letters in Bangor

  • A Bangor restaurant with a handsome stone or brick front can skip a fascia panel and let fabricated letters sit directly on the masonry.
  • Letters for Bangor frontages are usually 304 stainless; where a building faces the sea or a gritted main road, 316 keeps its finish for longer.
  • Gyms, studios and trade units in Bangor can use painted aluminium letters on profiled cladding for a durable name above the roller door.

What built-up 3D letters cost in Bangor

Guide prices start from £55 and go up to £165 per letter, exclusive of VAT. The breakdown below shows where different sizes and options sit. Nothing is final until we have measured up or checked your artwork and sent a written quote.

Built-up 3D letters in Bangor: guide prices, supplied and fitted
ItemGuide, ex VATInc. VAT (20%)
Fabricated letter, 300 mm tall£55 – £165£66 – £198
Typical business name (10–14 letters)£850 – £2,600£1,020 – £3,120
Logo or symbol, made to the same depth£150 – £650£180 – £780

Non-illuminated letters around 300 mm tall are guided at £55 to £165 per letter, supplied and fitted, excluding VAT. A typical business name of 10–14 letters is guided at £850 to £2,600, and a logo or symbol made to the same depth adds a guide £150 to £650.

Options for your Bangor project

Mirror-polished stainless

Reflective faces that catch light, but show fingerprints.

Brass or copper finish

Warm metallic faces, lacquered or left to patina.

Painted aluminium

Lightweight letters painted or powder coated to any RAL colour.

Do you need permission for a sign in Bangor?

Before any exterior sign goes up in Northern Ireland, it is worth checking the 2015 NI Advertisement Regulations. Some straightforward signs on business premises fall within what is allowed without applying, but the conditions are Northern Ireland's own and conservation areas need more care. Listed buildings usually need listed building consent as well, and works without it can be a criminal offence. We confirm the position with you before you commit to built-up 3D letters, and we can prepare the drawings and photographs for an NI Planning Portal application or submit it for you.

Covering Bangor and County Down

You do not need to be in a particular postcode for us to help: Bangor and the whole of County Down are covered. If your job needs a survey, we arrange the visit. If it can be priced from photos, sizes and the vehicle make and model, we do it that way instead.

Neighbouring towns

Start with a free quote: a handful of photos plus approximate widths and heights is enough for built-up 3D letters in Bangor. You check and approve the proof, and only then is anything made.

More signs in Bangor

All sign types in Bangor · Built-up 3D letters across County Down

Built-up 3D letters in Bangor: questions

Can non-lit built-up letters be lit later?

Not easily. Illuminated letters need translucent faces or open backs, internal LED modules, drain holes and cable routes designed in from the start. If lighting is a possibility, we can quote halo-lit or face-lit letters now, or plan spotlights for a non-lit set.

Do stainless steel letters rust?

Stainless steel resists rust well, but it is not immune. Grade 304 suits most inland sites; near the coast, grade 316 is specified because salt air can cause brown tea staining on 304. Occasional washing with clean water keeps either grade bright.

Can built-up letters go on cladding?

Yes, in most cases. Metal and composite cladding needs a fixing that suits the panel system, such as rivnuts, through-bolts to a backing rail, or a mounting rail behind the letters. We ask the building owner about the cladding before drilling, because some systems restrict penetrations.

Why is there a price range for built-up 3D letters rather than one figure?

Because jobs vary. The guide of £55 to £165 per letter + VAT spans small, simple work at one end and larger, more involved work at the other. Size, material, finish, access, design time and any consent drawings push the figure up or down. A survey or artwork check lets us fix the price for your job in Bangor.

Can you work to an opening date in Bangor?

Tell us the date when you enquire and we will say plainly whether it looks realistic. Timescales typically depend on how soon the proof is approved, how long production takes and whether consent is needed, which can take several weeks on its own. We plan around your date where we can, but we do not promise one we cannot control.

How do I get a quote for built-up 3D letters in Bangor?

Use the quote form, phone or WhatsApp and include a few photos, rough sizes and any logo files you have. We check the details, arrange a survey where one is needed, then send a fixed written price with a design drawn to scale. The quote is free, and nothing is made until you approve it.

Free quote · scale proof · fixed price

Ready to be seen?

Send a photo of your frontage or vehicle and a rough size. We’ll come back with ideas, a guide price and the next step.

Call WhatsApp Free quote