Built-up letters are three-dimensional letters fabricated, usually from metal sheet, with a face and returns joined into a hollow letter typically 50–100 mm deep, then fixed to a wall or sign on locators.
What you gain from built-up 3D letters in Chester
- For an office building on the edge of Chester with plain brick or cladding, brushed stainless letters read clearly from the car park.
- Hotels and venues in Chester wanting a lasting first impression may choose brass-finish letters, which suit traditional and modern buildings.
- Refurbishing a frontage in Chester? Plan letter positions with the architect's drawings so fresh render isn't drilled twice.
What built-up 3D letters cost in Chester
Guide prices start from £55 and go up to £165 per letter, exclusive of VAT. The breakdown below shows where different sizes and options sit. Nothing is final until we have measured up or checked your artwork and sent a written quote.
| Item | Guide, ex VAT | Inc. VAT (20%) |
|---|---|---|
| Fabricated letter, 300 mm tall | £55 – £165 | £66 – £198 |
| Typical business name (10–14 letters) | £850 – £2,600 | £1,020 – £3,120 |
| Logo or symbol, made to the same depth | £150 – £650 | £180 – £780 |
Non-illuminated letters around 300 mm tall are guided at £55 to £165 per letter, supplied and fitted, excluding VAT. A typical business name of 10–14 letters is guided at £850 to £2,600, and a logo or symbol made to the same depth adds a guide £150 to £650.
Options for your Chester project
Brass or copper finish
Warm metallic faces, lacquered or left to patina.
Contrast returns
Faces in one finish and sides in another, such as brushed with black.
316 stainless
Higher-grade stainless for coastal sites where salt air attacks lesser grades.
Do you need permission for a sign in Chester?
Will you need permission? For a non-illuminated sign at your own business address in England, usually not, as long as it stays inside the deemed consent limits: letters no taller than 0.75 m (0.3 m in an area of special control) and nothing above the bottom of a first-floor window. Historic streets need more care. In a conservation area the details matter more, and fixing to a listed building usually needs listed building consent, with fixings into mortar joints rather than brick or stone faces generally preferred. We check with you before anything is ordered, and can prepare drawings and photos for an application, or submit it for you.
Covering Chester and Cheshire
From the middle of Chester to the edges of Cheshire, the same survey, proof and fit process applies. If the job calls for someone on site, a visit is booked; if not, we price from photos, measurements and your artwork, then confirm the details once the artwork is checked. Postcode districts around Chester include CH1, CH2 and CH4. Chester is about 19 miles south-west of Warrington.
Close to Chester
- Built-up 3D letters in Deeside 6 mi
- Built-up 3D letters in Ellesmere Port 6 mi
- Built-up 3D letters in Buckley 8 mi
- Built-up 3D letters in Mold 10 mi
- Built-up 3D letters in Flint 11 mi
Tell us what you have in mind for built-up 3D letters in Chester. Snap the frontage, window or vehicle, add approximate sizes and send it over. Your quote is free, and the proof always comes before any making.
More signs in Chester
- Car wraps and colour change in Chester
- Lightbox signs in Chester
- Van sign-writing in Chester
- Tray signs in Chester
- Flat-cut letters in Chester
- Fleet livery in Chester
- Chapter 8 chevron kits in Chester
- Totem and pylon signs in Chester
All sign types in Chester · Built-up 3D letters across Cheshire