What is the difference between built-up and flat-cut letters?

Built-up letters are hollow, fabricated with separate faces and returns, so they can be 50–100 mm deep or more. Flat-cut letters are cut from one solid sheet, usually 5–10 mm thick. Built-up letters have more presence and share their construction with illuminated letters; flat-cut letters cost less.

What can delay built-up 3D letters in Slough?

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.

What makes built-up 3D letters more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Slough is £55–£165 per letter + VAT, confirmed after a survey or artwork check.

Do you cover smaller places near Slough as well?

Yes. Our coverage is not limited to Slough itself: nearby towns, industrial estates and business parks across Berkshire are included too. The process does not change with the postcode. Send photos and approximate sizes, and we will tell you whether a site visit is needed before we can give you a fixed price.

Do stainless steel letters rust?

Stainless steel resists rust well, but it is not immune. Grade 304 suits most inland sites; near the coast, grade 316 is specified because salt air can cause brown tea staining on 304. Occasional washing with clean water keeps either grade bright.

How do I keep metal letters clean?

Wash them a few times a year with warm water and a mild detergent, then rinse and dry, wiping brushed stainless along the grain. Avoid abrasive pads and bleach-based cleaners, which scratch or mark finishes. Mirror stainless and brass show marks fastest, so they suit positions out of reach.

Built-up 3D letters in Slough

Built-up letters are three-dimensional letters fabricated, usually from metal sheet, with a face and returns joined into a hollow letter typically 50–100 mm deep, then fixed to a wall or sign on locators.

Points in favour of built-up 3D letters in Slough

Business park tenants in Slough who mount letters on a shared entrance canopy should check the landlord's signage rules first.
For an office building on the edge of Slough with plain brick or cladding, brushed stainless letters read clearly from the car park.
Letters for Slough frontages are usually 304 stainless; where a building faces the sea or a gritted main road, 316 keeps its finish for longer.

What built-up 3D letters cost in Slough

Guide prices start from £55 and go up to £165 per letter, exclusive of VAT. The breakdown below shows where different sizes and options sit. Nothing is final until we have measured up or checked your artwork and sent a written quote.

Built-up 3D letters in Slough: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Fabricated letter, 300 mm tall	£55 – £165	£66 – £198
Typical business name (10–14 letters)	£850 – £2,600	£1,020 – £3,120
Logo or symbol, made to the same depth	£150 – £650	£180 – £780

Non-illuminated letters around 300 mm tall are guided at £55 to £165 per letter, supplied and fitted, excluding VAT. A typical business name of 10–14 letters is guided at £850 to £2,600, and a logo or symbol made to the same depth adds a guide £150 to £650.

Options for your Slough project

Brushed 304 stainless

Satin-grain stainless for most inland locations, classic and understated.

Brass or copper finish

Warm metallic faces, lacquered or left to patina.

316 stainless

Higher-grade stainless for coastal sites where salt air attacks lesser grades.

Do you need permission for a sign in Slough?

Will you need permission? For a non-illuminated sign at your own business address in England, usually not, as long as it stays inside the deemed consent limits: letters no taller than 0.75 m (0.3 m in an area of special control) and nothing above the bottom of a first-floor window. Historic streets need more care. In a conservation area the details matter more, and fixing to a listed building usually needs listed building consent, with fixings into mortar joints rather than brick or stone faces generally preferred. We check with you before anything is ordered, and can prepare drawings and photos for an application, or submit it for you.

Covering Slough and Berkshire

We take on work in Slough, across Berkshire and throughout the UK. When a survey makes sense, typically for anything fixed at height or illuminated, we arrange a visit. Graphics are often priced from pictures and dimensions, with a survey added only if the photos leave questions. Postcode districts around Slough include SL1, SL2, SL3 and SL4. Roughly 17 miles separate Slough from Reading, which lies to the west.

Close to Slough

Built-up 3D letters in Windsor 2 mi
Built-up 3D letters in Maidenhead 5 mi
Built-up 3D letters in Gerrards Cross 6 mi
Built-up 3D letters in Uxbridge 6 mi
Built-up 3D letters in Egham 6 mi

The next step costs nothing: send us photos and sizes, and we will quote for built-up 3D letters free of charge. You see and approve the design first, so nothing is made on guesswork.

More signs in Slough

All sign types in Slough · Built-up 3D letters across Berkshire

Typical size	Letters around 300 mm tall on shopfronts; taller on larger buildings
Consent	Non-lit letters often deemed in England within limits; upper-storey letters usually need express consent
Typical lead time	typically 3–5 weeks after proof approval, depending on metal and finish